Skutt manufactures Electric Kilns for firing ceramics and glass. These
kilns are designed to be used in consumer, institutional, and industrial applications.
They come in a wide variety of sizes and are designed to meet a broad spectrum
of applications including but not limited to:
- School Classrooms
- Art Studios
- Community Centers, Hospitals and Prisons
- Homes
- Manufacturing Facilities
- Research Facilities
KilnMaster Kilns - Digital controller specifically designed to fire ceramics.
Includes: Preset programs, Design and store custom programs, Delay Start,
Temperature Alarm, Preheat, Programmable Safety Controls, Full Diagnostic
Software and Hardware built in.
KilnSitter Kilns are controlled manually with switches and include a KilnSitter
shutoff device. Optional Safety Timer recommended. A wall mounted KilnMaster
Controller is also available to work in conjunction with KilnSitter Kilns for
a redundant system.
GlassMaster Kilns - Digital controller specifically designed for fusing and
slumping glass.
Visit http://www.skutt.com/contractors/index.php for our Architects and Contractors
web page for downloadable specifications, installation procedures, and safety
listings.
- Most models with an interior chamber larger than 22.5” include
a Spring Assisted Lid.
- Built in Current Sensor on all KilnMaster and GlassMaster enables complete
diagnostic software.
- Balanced Elements ensure even temperatures throughout the chamber and efficient
firings.
- Sectional Design makes it possible to easily disassemble the kiln to move
it through doorways. Reassembles in minutes. Easy to repair.
- Instructional DVD included with KilnMaster kilns covers installation, programming
and basic repair.
- Two Year Part and Labor Warranty
- UL Safety Listed
New Safety Features - Ever worry about a student or employee
entering the wrong temperature or cone value and causing a meltdown in your
kiln? You can now enter a maximum programmable temperature which makes it impossible.
You can also program the kiln so it requires 2 key presses to start the program.
This prevents accidental starts by curious passers-by.
The KilnMaster line of kilns gives you two ways to achieve precise firings
time after time. Cone Fire Mode uses sophisticated software to run preset
programs which are based on the Speed and Cone Value you enter. The Cone
Fire Mode even calculates the perfect ending temperature based on how fast
or slow the kiln is firing. Ramp/Hold Mode lets you design and store your
own firing programs of up to eight segments. You are in total control of
the heating and the cooling rates. Both programming modes offer the ability
to Pre-Heat, Hold at peak temperature, Delay firings, set temperature Alarms,
Review programs, and View program status. You will love the flexibility and
control the KM line of kilns provides.
The Dawson KilnSitter has proven itself as a reliable way of controlling
kilns for more than 50 years. The temperature and heating rate of KilnSitter
(KS) Kilns are controlled by switches which you turn up in intervals which
are determined by how fast or slow you wish to fire the kiln. The KilnSitter
uses pyrometer cones to measure the heatwork inside the kiln. When the pyrometric
cone begins to melt the KilnSitter automatically shuts off the kiln.
A unique feature of the KilnSitter line of Skutt kilns is that most models
can be expanded by inserting a 4.5" brick ring between the sections. This
ring can be added or removed between firings as space requirements vary. An
optional safety timer is also available to help prevent accidental overfires.
EnviroVent2 - U.L. listed, negative pressure, downdraft kiln
ventilation system. Installs in minutes. All components for a standard installation
included with the kit. Required by most Schools and Institutions.
EnviroLink - Links vent to controller. On and off settings
for the fan may be set through the kiln’s controller.
Kiln Furniture Kits - Required to load kiln.
CSI 3 Part Spec available on our website.
Contact
Skutt Ceramic Products Inc.
President, Jim Skutt * Director of Marketing, Mike Sievers
6441 SE Johnson Creek Blvd.
Portland, OR 97206
Tel: 503-774-6000
Fax 503-774-7833
Website: www.skutt.com (Click on the Architects/Contractors link)
E-mail: info@skutt.com
|