Maintenance-of-Masonry - 04 01 00 - Sweets Network Feed

Abatron, Inc.

Abatron, Inc., began in 1959 as epoxy specialists. With this starting advantage in a complex field, it also developed urethanes, polyesters, acrylics, vinyls, silicones and other compounds meeting federal, military, industrial, electronic, architectural and marine specifications in structural and decorative restoration, maintenance/repair, as well as in mold-making, electronics, coatings, adhesives, sealants and chemical specialties.

Advance Concrete Form, Inc.

Advanced Chemical Technologies, Inc.

Ahrens Chimney Technique, Inc.

AkzoNobel Paints LLC

Glidden Professional™ paints is the only national brand of decorative coatings dedicated exclusively to serving the needs of the professional marketplace.

Alco-NVC, Inc.

Aldon Corp.

American Pneumatic Tools, Inc.

Anti-Hydro International, Inc.

Ardex Americas

Armorlon, Division of Reef Industries, Inc.

The American Concrete Institute recommends maintaining a satisfactory moisture content for the best concrete curing results. Lack of sufficient moisture during the curing process can cause cracking, dusting, scaling and crazing. Transguard 4000 provides an effective way to maintain appropriate moisture levels during curing.

Arrow Magnolia International LP

Athena Controls, Inc.

Auburn Cement Prods. Co., Inc.

Beavertown Block Co., Inc.

Berylex National Sales

Bldg. Resource, Inc.

BLOK-LOK LIMITED

BOC Gases

Brickform Rafco Products

Brickyard, Inc. (The)

Buckeye Technologies Inc.

Cartier Chemicals, Ltd.

Castaic Brick Mfg. Co.

Cathedral Stone Products, Inc.

Channel Products, Inc.

Chase Construction Products

Capital Services, E-poxy Engineered Materials and Royston have been longstanding manufacturers within the construction industry. Together, Chase Construction Products emerges as a technically supported and quality assured resource for waterproofing sealants, expansion joint systems and accessories for the transportation, industrial and architectural markets.

ChemCo Systems

ChemMasters

Chromalox, Inc.

Clemons Concrete Coatings

Concrete Edge Co. (The)

Concrete Polishing Inc.

CONCRETE REFLECTIONS

Concrete Polishing Technologies

Convenience Products

CPD Construction Products

Curecrete Distribution, Inc.

Custom Building Products

Every industry has its leader. An innovator that constantly raises expectations. A single source, with dependable service and support. In the world of tile and stone installation systems, that name is Custom Building Products. Coupled with our resources to provide you with accurate information, specifying Custom amounts to a trusted choice every time. Every step of the way, we provide products that set industry standards for innovation, quality and performance. Service and support that is unmatched.

Dayton Superior Chemical

Diedrich Technologies, Inc.

Dumond Chemicals, Inc.

Dur-A-Flex, Inc.

Dur-A-Flex, Inc. has set the standard for versatility. As Pioneers in epoxy technology since 1966, Dur-A-Flex, Inc. has experienced consistent growth bringing it to its current standing as an industry leader. Our unfailing commitment to improving today’s flooring and coating products has resulted in a well balanced, uniquely versatile line of top quality, time proven polymer products.

E-Poxy Industries, Inc.

EDCO-Eqpmt. Dvlpmt. Co., Inc.

Edoco

Environmental Coating Systems, Inc.

Euclid Chemical Co. (The)

Fabrene, Inc.

Fizzano Bros. Concrete Products, Inc.

Formwork Exchange

Fortifiber Corp.

Garman Co., Inc.

GDM, Inc.

Hacker Industries, Inc.

With more than a billion square feet installed nationwide, Hacker Industries, Inc. continues to lead the industry supplying the highest quality cementitious floor underlayments, installed by highly trained, Licensed Applicators. Since the company’s inception in 1983, Hacker Industries, Inc. has provided superior gypsum floor underlayment products to meet or exceed the most demanding project specifications.

Haviland Corp.

Helifix North American Corp.

The comprehensive Helifix range of stress-free stainless steel ties, fixings and masonry repair products is precision engineered to our own unique design which combines the required strength with flexibility, durability and holding power.

Hi-Way Concrete Products Co., Inc.

HMK Stone, Tile & Paver Care System

HTC, Inc.

HTC, Inc., a privately owned company, distributes HTC products to the United States, Mexico, and Canada. The company operates separately from HTC Sweden AB, but the companies work together on a daily basis to keep HTC on the cutting edge of professional flooring systems. There are 18 worldwide HTC Partners. All HTC Partners share the same mission to offer a superior product, friendly service and guidance, all at a competitive value. More than ever HTC, the industry leader in surface prep and concrete grinding equipment and tools, is positioned to forge ahead, impacting and growing the industry. This is why all HTC Partners are committed to educating our customers, potential customers, end-users, potential end-users, architects, designers, and facility mangers on the benefits and opportunities of our exciting young industry.

Hudson: H.D. Hudson Mfg. Co.

Indiana Limestone Institute

Insulmastic Bldg. Products

J.M.C.V.B. Technologies, Inc.

K&L Ready Mix

Kansas Building Products

Kaufman Products, Inc.

Kem-O-Kleen

Kem-O-Kleer Kleen

Kemiko

EPMAR Corporation - Kemiko product line of quality architectural coatings, stains, and sealers offer the greatest range of color available for concrete. Assurance of quality gained from many years of application as well as manufacturing, Kemiko stains and coatings offer the best color reliability and permanence.

L&M Construction Chemicals, Inc.

For over 40 years, L&M has been known for innovative and high-quality concrete treatments, polymer-modified concrete repair systems, and high-performance non-shrink grouts.

L.M. Scofield Company

4155 Scofield Road Douglasville, GA 30134 Tel: (770) 920-6000 Toll Free: (800) 800-9900 Fax: (770) 920-6060 LM Scofield Europe Ltd., UK Tel: 44 1226 73222

Larsen Products Corp.

LARSEN CONCRETE & PLASTER BONDING AGENTS. Wherever You Need High Performance Bonding Of Cementitious Material Direct To Structural Surfaces. Concrete & Plaster Bonding Systems Worldwide Since 1952.

Laticrete International, Inc.

LATICRETE International is the world leader in high strength, shock and weather resistant installation systems for ceramic tile, pavers, brick and stone. For over 40 years, LATICRETE International has provided the technology and products to make innovative, permanent installations for ceramic tile and related finishes. LATICRETE materials are designed to perform as a system. Fully compatible products for surface preparation, waterproofing, adhesives, and gouting ensure single source responsibility.

Legacy Decorative Concrete Systems, Inc.

Legacy Decorative Concrete Systems Inc. offers a complete line of decorative architectural concrete overlays, stamping tools, and specialty products for custom interior and exterior flooring and paving solutions. A variety of colors and finishes are available to replicate stone, brick, tile and more. Legacy also offers a complete line of sealer and top-coat protectants against weather, and pedestrian and vehicular traffic.

Lyons Mfg., Inc.

Mapei Corporation

MAPEI's culture of innovation and excellence is rooted in the company history. Founded in Milan, Italy by Mr. Rodolfo Squinzi in 1937, MAPEI grew from a small wall-paint producer into a specialist in adhesives and sealants for building during the 1950's. Under Mr. Squinzi's leadership, the company developed its first adhesives for ceramic tile in the 1960's.

Maxxon Corp.

Since gypsum first met sand in 1972, Gyp-Crete, now Maxxon^® Corporation, has provided superior underlayment products for solving virtually any floor problem. Maxxon not only started the industry, but continues to lead it with high quality products, training, research and expert installation by a nationwide network of authorized dealers.

Meadows: W. R. Meadows, Inc.

Merkrete

Mill-Rose Co.

Miller Products & Supply, Inc.

Miracote Division of Crossfield Products Corp.

Miracote Products are concrete coating, waterproofing and repair materials. Designed for exterior use, they protect and restore concrete surfaces from the consequences of freeze-thaw, seismic activity, building settlement and water intrusion. Miracote applications produce finishes which either restore concrete to like new appearance or provide enhanced visual interest through a wide range of available colors, textures and patterns.

Monfort Bros., Inc.

National Energy Control Corp.

Nawkaw Corp.

Nelson Industrial Services, Inc.

North Star Ice Eqpmt. Corp.

Norton Abrasives

Ogontz Corp.

Palmer Asphalt Co.

Pearl Abrasive Co.

Pearlweave Safety Netting Corp.

Pennkote, Ltd.

Pennys Concrete, Inc.

Perfect Polish

Perfect Polish has been in the business of providing floor solutions for the past seven years. We have refinished and restored different types of problematic floors of all ages. From the 50 year old floor to a new construction site each of the floors we have encountered has brought us to a greater knowledge and clearer understanding of the concrete flooring industry.

Produits Chemique Cartier

Progress Unlimited, Inc.

PROSOCO, Inc.

PROSOCO is a national manufacturer of products that clean, protect and maintain concrete, brick and stone.

Putzmeister America, Inc.

Quest Construction Products

QuestMark Flooring

CENTIMARK CORPORATION

Reed Concrete Pumps

Reef Industries, Inc.

Griffolyn^® Reinforced Vapor Retarders have set the standard for moisture vapor control for over 40 years. The Griffolyn^® System features a complete product line of vapor retarders, seaming tapes and pipe boots for total moisture infiltration control. There are several levels of permeance to choose from to meet the specific project demands for roofing, wall and underslab applications.

Ross: Frank T. Ross, Ltd.

Rudd Co., Inc.

Saco Brick Company

Samax Enterprises

Sanders Saws, Inc.

Schwank, Inc.

SDS Non-Destructive Testing Eqpmt., Inc.

SealMaster

SilPro Corp.

Sinak Corporation

Solomon Grind-Chem Service, Inc.

Solomon Colors was started by the Solomon Family in 1927. During the early years of the operation, Solomon Colors was involved in underground mining of coal as well as crushing, grinding, and blending various natural minerals such as slate and iron ore. As the use of high sulfur coal was being phased out by various power companies, the Solomon business shifted in the direction of providing various grind levels of natural iron ore.

Southern Color & Chemical Co.

Southern Grouts & Mortars, Inc.

Specialty Concrete Products

Specialty Resin Systems (SRS)

Standard Concrete Products Co.

Summit Brick & Tile Co.

Super Products

Super-Krete International, Inc.

SUPERABRASIVE

Symons

From simple, labor-saving column clamps, to factory-built, modular formwork, to chemical systems and accessories, Symons has dedicated itself to innovation in the concrete construction industry. This dedication has made Symons the recognized leader in concrete formwork and accessories since 1901. By concentrating resources in the concrete construction industry, Symons has been able to solve complex concrete forming problems and reduce related construction costs.

Teletrol Systems, Inc.

Tennant

Tennant offers a complete floor-care solution, with industrial and commercial cleaning equipment for indoor and outdoor environments, plus a comprehensive line of high-performance floor coatings. Tennant offers a wide range of surface finishes designed for a variety of applications. Their products include tough, high-gloss finishes that can take the punishment of high-volume, steel-wheeled traffic, and special finishes that control electrostatic discharge and protect against hazardous chemicals.