SYSTEM DESCRIPTION:

The 35H entrance doors are hurricane impact resistant for both large and small missile requirements. The 3-1/2" 35H door is designed to provide maximum security under the most demanding conditions without the need for steel reinforcing. The doors are available with butt hinges and maximum-security dead bolts, or optional exit devices for egress requirements.

OPTIONS & FEATURES:

•    ASTM E-1886/E-1996, TAS 201, 202, and 203
     +70/-90 PSF (Large & Small Missile Impact)
•    Miami Dade NOA and Florida state-wide product approval
•    Integrates with YHS and YHC systems
•    Accepts 9/16" glazing
•    Large Missile dry glazing option
•    Blast Mitigation Testing – ASTM F 1642
•    YKK AP patented VersaJamb^® tubular door frames for added strength

SMART SERIES PUSH/PULL

To provide maximum flexibility and occupant safety, YKK AP is pleased to introduce the Smart Series one inch diameter Push/Pull. The pull handle is open to permit access to the lock cylinder and is slightly angled to provide a uniquely modern look. The Smart Push starts at the locking stile similar to a typical one inch diameter push bar, but then has an ergonomic “S-Bend” toward the locking stile to bring the bar closer to the door where it is captured by a patented end cap. This innovative push bar easily accommodates custom width openings while subtly informing a pedestrian which side of the door to push on when exiting a building.

DOR-O-MATIC^® EXIT DEVICE

The new and modern Touch Bar exit device from Dor-O-Matic^® is ideally suited for all applications that require emergency egress. The device is ANSI Grade 1, carries the UL label and is approved for Life Safety. The concealed vertical rod features single point dogging and is available with electric actuation.

STOCK ENTRANCES

• 3'-0" x 7'-0" & 3'-0" x 8'-0" Singles
• 6'-0" x 7'-0" & 6'-0" x 8'-0" Pairs
• Butt Hinges
• MS Locking System
• 3-Point Locks for Singles & 5-Point Locks for Pairs

CUSTOM ENTRANCES

• Singles up to 4'-0" x 8'-0"
• Pairs up to 8'-0" x 8'-0"
• Custom Push/Pulls

01-5101-00