- 20D Narrow Stile Door: A standard commercial entrance with narrow sight lines designed for light to medium traffic
- 35D Medium Stile Door: Designed for medium traffic areas, ideally suited for institutional installations
- 50D Wide Stile Door: Designed for medium to high traffic use, well suited for monumental applications
Entrance systems by YKK AP offer an abundance of design options. VersaJamb®, our unique reinforced tubular door frame, allows for side-lite glazing without shear clips while maintaining the structural integrity of transom frames. Door corners are mechanically joined and welded to ensure that they are more than capable of withstanding today’s most demanding conditions. Standard hardware options include the Smart Series Push/Pull and Dor-O-Matic® touch bar exit devices. Custom entrances are available with options for one inch glazing, mid rails, high bottom rails and will accommodate most custom hardware.
To provide maximum flexibility and occupant safety, YKK AP is pleased to introduce the Smart Series one inch diameter Push/Pull. The pull handle is open to permit access to the lock cylinder and is slightly angled to provide a uniquely modern look. The Smart Push starts at the locking stile similar to a typical one inch diameter push bar, but then has an ergonomic “S-Bend” toward the locking stile to bring the bar closer to the door where it is captured by a patented end cap. This innovative push bar easily accommodates custom width openings while subtly informing a pedestrian which side of the door to push on when exiting a building.
The new and modern Touch Bar exit devices from Dor-O-Matic® are ideally suited for all applications that require emergency egress. The devices are ANSI Grade 1, carry the UL label and are approved for Life Safety. Both the rim and concealed vertical rod devices feature single point dogging and are available with electric actuation.
- 20D Narrow Stile 3'-0" and 3'-6" x 7'-0" Singles
- 20D Narrow Stile 6'-0" x 7'-0" Pairs
- Offset Pivot, Butt Hung and Center Pivot
- MS Lock and CVR Exit Device (Offset Pivot only)
- 20D, 35D, and 50D
- Doors up to 8'-0" Tall
- Standard and Custom Hardware
01-5100-00
YKK AP America Inc. Headquarters
7680 The Bluffs, Suite 100
Austell, GA 30168
Ph: 1-800-955-9551
Fax: 678-838-6001
Email: APInfo@ykk-api.com
|