WINCO
6200 Maple Avenue
P.O. Box 321
St. Louis, MO 63130
Tel: (314) 725-8088
Toll free: (800) 525-8089
Fax: (314) 725-1419
Email: info@wincowindow.com
Web site: http://www.wincowindow.com
Series fixed and casement windows exceed the performance specifications
set forth in ANSI/AAMA/NWWDA 101/I.S.2-97 for Architectural Windows – AW
and Heavy Commercial –HC.
The frame material is constructed from 0.062/0.090/0.125” nominal
wall thickness of 6063-T6 aluminum alloy and temper with a depths of 2”/3-1/2”/4”/4-1/2”.
It features a standard equal leg some with unequal leg frame. Optional: Long
unequal leg frame on some. All exterior aluminum is separated from interior
aluminum by ridged, structural, pour-in-place thermal barrier. All joinery
of frame members is closely fit and mechanically fastened with screws. Optional: Heliarc
welded frame corners are optional. All frame joinery is sealed with small
joint sealant.
All operating ventilators consist of a tubular member with .125” nominal
wall thickness of 6063-T6 aluminum alloy and temper with a depth of 2”/3-1/2”.
All exterior aluminum is separated from interior aluminum by ridged, structural,
pour-in-place thermal barrier. Vent corners are mitered and assembled by
means of mechanical fastening with screws. All vent joinery is sealed with
small joint sealant. Operating ventilators have a double Santoprene®,
non-shrinking dual durometer, thermo plastic rubber weather-stripping around
perimeter. Optional: Heliarc welding of sash corners
and/or double corner keys and hydraulically swedged.
Windows are interior or exterior glazed with extruded aluminum, snap-in
glazing bead. All extruded glazing bead has a minimum depth of 3/4”.
Glazing of 1/4” to 1” in most systems, with maximum glass thickness
up to 3” in some systems and maximum panel thickness up to 4” in
some systems.
Screen frames are fabricated from extruded 6063-T6 aluminum alloy and temper.
Aluminum screen wire produced from 5154 alloy in .011 diameter with mesh
18 x 16 is standard. Charcoal Alodized and Brite Kote Aluminum are standard
colors. Mesh is installed so the cloth can be easily replaced with a roll-in
spline. Suitable hardware is furnished to mount on the window unit. Optional: Fiberglass
or stainless steel with .009 diameter wire.
All exposed locking hardware, strikes and keepers are solid white bronze
alloy with US25D brushed finish. All four bar casement arms, friction adjustable
H.O.A., and key release limit arms consist of stainless steel conforming to
AAMA 904.1. Optional: Zinc die-cast with painted
finish and or zinc plated steel arms. Casement Windows (out-swing)
are furnished with roto-operator, two point lock and 5-knuckle butt hinge with
stainless steel pin. Optional: Four bar casement hinge,
casement lock, cam lock, key lock, pull handle, emergency exit sign. (in-swing)
are furnished with four bar casement arms two point lock and pull handle. Drop
Head In Swing Windows are furnished with key locks hold open arms,
and four bar arms. Optional: Cam lock, pole ring
cam lock, casement lock, pull handle.
Santoprene is a registered trademark of Advanced Elastomer Systems
|