WINCO
6200 Maple Avenue
P.O. Box 321
St. Louis, MO 63130
Tel: (314) 725-8088
Toll free: (800) 525-8089
Fax: (314) 725-1419
Email: info@wincowindow.com
Web site: http://www.wincowindow.com

Hurricane Windows

Hurricane Resistant Windows

PERFORMANCE

The Windows fixed, projected, and casement windows exceed the performance specifications set forth in ANSI/AAMA/NWWDA 101/I.S.2-97 for Architectural Windows – AW and Heavy Commercial –HC. Tested to TAS 201, 202, 203 Large Missile Impact.

MAIN FRAME CONSTRUCTION

The frame material is constructed from .125”OR .062” nominal wall thickness of 6063-T6 aluminum alloy and temper with a depth of 4”OR 2”. It features a standard equal leg frame. All exterior aluminum is separated from interior aluminum by ridged, structural, pour-in-place thermal barrier. OR Non-Thermal frames All joinery of frame members is closely fit and mechanically fastened with screws. Heliarc welded frame corners are optional. All frame joinery is sealed with small joint sealant.

VENT FRAME CONSTRUCTION

All operating ventilators consist of a tubular member with .125”OR .062” nominal wall thickness of 6063-T6 aluminum alloy and temper with a depth of 2” . All exterior aluminum is separated from interior aluminum by ridged, structural, pour-in-place thermal barrier. OR Non-Thermal. Vent corners are mitered and assembled by means of mechanical fastening with screws. All vent joinery is sealed with small joint sealant. Operating ventilators have a double Santoprene^®, non-shrinking dual durometer, thermo plastic rubber weather-stripping around perimeter. OR Fin seal pile weatherstrip. Optional: Heliarc welding of sash corners and/or double corner keys and hydraulically swedged.

GLAZING

Windows are interior or exterior glazed with extruded aluminum, snap-in glazing bead. All extruded glazing bead has a minimum depth of 3/4”. Glazing of 15/32”” can be utilized.

SCREEN

Screen frames to be fabricated from extruded 6063-T6 aluminum alloy and temper. Aluminum screen wire produced from 5154 alloy in .011 diameter with mesh 18 x 16 is standard. Charcoal Alodized and Brite Kote Aluminum are standard colors. Mesh is installed so the cloth can be easily replaced with a roll-in spline. Suitable hardware is furnished to mount on the window unit. Optional: Fiberglass or stainless steel with .009 diameter wire.

HARDWARE

All exposed locking hardware, strikes and keepers are a special alloy with  brushed finish. All four bar arms, four bar casement arms, friction adjustable H.O.A., and key release limit arms consist of stainless steel conforming to AAMA 904.1. Projected Windows are furnished with cam locks and four bar arms. Optional: Pole ring cam lock,  key lock, casement lock, pull handle. Casement Windows (out-swing) are furnished with roto-operator, two point lock and 3-knuckle butt hinge with aluminum pin. emergency exit sign. Drop Head In Swing Windows are furnished with key locks hold open arms, and four bar arms. Optional: Cam lock, pole ring cam lock, casement lock, pull handle. Sliding Window Standard operating hardware consists of an aluminum extruded spring-loaded snap lock located at the jamb. Optional: Solid white bronze sweep lock with US25D brushed finish at sash interlock and or solid white bronze snap lock with US25D brushed finish.  Operating horizontal sliding vents are equipped with a pair of steel ball bearing rollers and a steel pin with nylon tires in a nylon housing. Hung Window Standard operating hardware consists of aluminum extruded spring loaded snap lock at the sill.   All operating sash balances are spiral type meeting the minimum class 5 requirement and tested in accordance with AAMA 902.

Santoprene is a registered trademark of Advanced Elastomer Systems.