Duct Sealants, Gaskets and Adhesives Model ART
Roller Type Adhesive

• Designed for bonding duct liner, duct wrap and fibrous glass insulations to painted steel, galvanized or aluminum duct
• Can also be used a contact bond adhesive in areas where water entrapment may be a problem
• This water-based product is UL listed and meets NFPA 90A and 90B 25/50 requirements
• Available in 5 gallon buckets

• Designed for bonding fiberglass and mineral wool duct liner to galvanized duct
• Ideal for applying with high volume spray and coil line operations
• Can also be applied by extrusion or manual spray equipment
• This water-based product is UL listed and meets NFPA 90A and 90B 25/50 requirements
• Available in 55 gallon drums

• Designed as a high velocity duct joint sealant for indoor applications
• Can also be used to adhere duct fabrics and flexible duct to high velocity ducts
• This solvent-based product is UL listed and meets NFPA 90A and 90B 25/50 requirements
• Available in 1 gallon buckets or 11 ounce tubes

• Designed as a vapor barrier duct sealant for indoor or outdoor applications
• Can be applied to galvanized, aluminum or mild steel ducts
• It is ideal for sealing ASJ, FRK and FSK jackets and board facings at joints or laps
• Also use over staple and weld pin punctures
• The cartridge grade is an ideal joint sealant with polystyrene insulation
• This water-based product is UL listed and meets NFPA 90A and 90B 25/50 requirements
• Available in 5 or 1 gallon buckets or 11 ounce tubes

• Designed as a vapor barrier duct sealant for indoor or outdoor applications
• Can be applied to galvanized, aluminum or mild steel ducts
• Also use over staple and weld pin punctures
• Fiber reinforcement ensures that it is tough yet flexible
• This water-based product is UL listed and meets NFPA 90A and 90B 25/50 requirements
• Available in 5 or 1 gallon buckets or 11 ounce tubes

• Provides a non-drying, permanently flexible seal for rigid or expansion joints on a variety of materials
• It provides a moisture and vapor tight seal
• Available in 55 gallon drums or 5 gallon buckets

• Provides a non-drying, permanently flexible gasket
• It will adhere to a variety of clean, dry surfaces
• Contains high percentage of virgin butyl rubber to enhance its sealing and aging characteristics
• It is formulated to retain handling properties through a wide temperature range
• It will not crack or separate while being applied at low temperature ranges
• Product is 1/8” thick and 5/8” wide, and is available in 30’ rolls
• Product is UL listed

• Provides a non-drying, permanently flexible gasket
• It will adhere to a variety of clean, dry surfaces
• Contains high percentage of virgin butyl rubber to enhance its sealing and aging characteristics
• It is formulated to retain handling properties through a wide temperature range
• It will not crack or separate while being applied at low temperature ranges
• Product is 1/8” thick, and is available in 1”x2” and 2”x3” patch sizes
• Product is UL listed

• Closed cell foam comprised of neoprene, PVC and nitrile
• It has good chemical resistance and is flame rated
• Product is 5/16” thick and 3/4” wide, and is available in 50’ rolls
• Product is UL listed

For installation instructions and additional information, please visit our website www.wardind.com.