Ceiling Radiation Dampers

• Rollformed 22 gauge galvanized frame
• Formed 22 gauge galvanized blades
• Rollformed 22 gauge galvanized hinge
• Double blade butterfly configuration
• Available in both easy access (EA) and link plate (LP) versions for mounting the fusible link
• Minimum unit size: 4”x4”
• Maximum unit size: 24”x24”
• Dimensions are determined by blade width (hinge dimension) then by blade height (w x h)
• Insulation and scrim are required on dampers over 80 in2 in area
• Insulation and scrim are optional on dampers less than 80 in2 in area
• UL Listed ceiling radiation damper
• Tested to UL 555C: File R16579
• Meets NFPA 90A requirements
• Listed with California State Fire Marshall: Listing 3225-1577:101
• Reference 50/55 Series sizing chart for damper sizing
• Reference 50 Series Installation Instructions

• Rollformed 22 gauge galvanized frame
• Formed 22 gauge galvanized blade
• Stainless steel spring hinge
• Single blade configuration
• Available sizes: 8”x4”, 10”x4” and 12"x4”
• Dimensions are determined by blade length (hinge dimension) then by blade width
• Insulation and scrim are optional on dampers less than 80 in2 in area
• UL Listed ceiling radiation damper
• Tested to UL 555C: File R16579
• Meets NFPA 90A requirements
• Listed with California State Fire Marshall: Listing 3225-1577:101
• Reference 50 Series Installation Instructions

• Rollformed 22 gauge galvanized frame
• Formed 22 gauge galvanized blades
• Rollformed 22 gauge galvanized hinge
• Double blade butterfly configuration
• Available in both easy access (EA) and link plate (LP) versions for mounting the fusible link
• Minimum unit size: 4” diameter
• Maximum unit size: 24” diameter
• Insulation and scrim are required on dampers over 80 in2 in area
• Insulation and scrim are optional on dampers less than 80 in2 in area
• UL Listed ceiling radiation damper
• Tested to UL 555C: File R16579
• Meets NFPA 90A requirements
• Listed with California State Fire Marshall: Listing 3225-1577:101
• Reference 50/55 Series sizing chart for damper sizing
• Reference 55 Series Installation Instructions

• UL Listed ceiling radiation damper factory mounted in a galvanized boot
• Available in the following styles:

End boot
Ell boot (90 egree)
Straight boot

• Available with collars ranging from: 4” to 10”
• Available with throat depths of: 4”, 6”, 8”
• Available with or without a flange
• Factory assembled to ensure proper fit and placement
• Eliminates the need for labor to install in the field
• Reference CRD Installation Instructions

For installation instructions and additional information, please visit our website
www.wardind.com.