RJ-711 Adjustable Veneer AnchorDESCRIPTION- RJ-711 adjustable veneer anchor with a 3/16" dia pintle meets the Brick Institute of America’s requirement of a maximum deflection of less than .05 inches (1.2mm) when tested at an axial load of 100 pounds in tension and compression. Extensive test results available upon request.
- Pintle adjustments are maximum of 1-1/4" up or down and prevent in-and-out movement beyond allowable tolerances.
- Veneer can be reinforced with optional Wire-Bond welded seismic clip and 9gauge or 3/16" diameter continuous wire.
GAUGES / FINISHES: - 14 gauge or 12 gauge thick
- Hot Dip Galvanized / Stainless Steel
PINTLE DIMENSIONS: - Pintle lengths are 3-1/4", 4-1/4", and 5-1/4".
- 3/16" Diameter
NOTE: - Legs fabricated to accommodate 1", 1-1/2", 2", 2-1/2" and 3" insulation.
- Test data provided upon request.
- Optional Wire-Bond welded seismic clip and 9gauge or 3/16" diameter continuous wire available for seismic applications.
WIRE-BOND®
400 Roundtree Rd
P.O. Box 240988
Charlotte, NC 28224
Tel: (704) 525-5554
Fax: (704) 525-3761
Tollfree: (800) 849-6722
E-mail: info@wirebond.com
Web site: http://wirebond.com
|