Most economical exterior wall system
For economy, Panel Rib beats wood, concrete, or masonry alternatives. Self-drilling,
color-matched fasteners and a 36" panel width give you rapid, economical
installation. Panel Rib comes in lengths up to 41', which can provide a continuous
panel from foundation to eave. This eliminates the need for end-laps and assures
you of wall integrity and weather-tightness. These panels are available in
13 standard KXL finish colors and a variety of custom colors. 26 gauge is standard,
but you also have the option of 22 or 24 gauge.
- Economical
- 36" coverage
- 1-1/4"-high rib
- Lengths up to 41'
- 26, 24, and 22 gauge Galvalume™ steel
- Fast installation
- Dade County Building Commission approved
- Available with standard crimped base or square cut with base trim
Most economical interior wall system
LPR-36 wall panels are 28 gauge and measure 36" wide. Liner Panel is
an ASTM A653 Grade 33 steel with a zinc coating. The panel is painted with
a white polyester finish on one side and a gray primer coating on the reverse.
- Same profile as Panel Rib
- 36" coverage
- Lengths up to 41'
Concealed fasteners wall system
Stran-Lok is more economical than concrete, masonry, or wood alternatives,
yet provides an attractive architectural look. Panels are standard 24 gauge
(22 gauge option) and come in lengths up to 30', providing a continuous wall
panel from foundation to eave and eliminating the need for end-laps while assuring
wall integrity and weather-tightness. Stran-Lok is available in 13 standard
KXL finish colors and a variety of custom colors.
- Concealed fasteners
- 16" on-center panel can also be used on metal studs
- 1-1/4" deep x 5" wide recess
- Lengths up to 30'
- 3" depth for added strength
- Embossed finish
Semi-concealed fasteners
The Vee Rib wall panel features a V-groove pattern, semi-concealed fasteners
located in the bottom of the groove, and 1-1/4" reveals. Its surface,
embossed for esthetic appeal, reduces glare. Self-drilling fasteners and 36" panel
width provide for economical installation. Vee Rib comes in lengths up to 39',
which can provide a continuous panel from foundation to eave, eliminating the
need for end-laps while assuring wall integrity and weather-tightness. The
panel is available in 13 standard KXL finish colors and a variety of custom
colors.
- 36" coverage
- Embossed finish
- Lengths up to 39'
- Sculptured reveal appearance
- Fast installation
- Available in standard 26 gauge (22 and 24 gauge options)
- Dade County Building Commission-approved
Reverse-rolled version of Panel Rib
RPR Panel is a reverse-rolled version of our popular Panel Rib profile. This
economical wall system features self-drilling, color-matched fasteners and
a 36" panel width to provide fast and easy installation. The panel comes
in lengths up to 41', which can provide a continuous panel from foundation
to eave, eliminating the need for end-laps while assuring wall integrity and
weather-tightness. The panel is available in 13 standard KXL finish colors
and a variety of custom colors. RPR can effectively use up to 6' of blanket
insulation, as well as up to 2-1/2" of rigid board insulation.
- 36" coverage
- 1-1/4"-high rib
- 24 and 26 gauge Galvalume™ steel
- Lengths up to 41'
- Economical
- Fast installation
Metal panel with textured-stucco appearance
TextureClad combines the rich look of textured stucco with the strength and
durability of 20 gauge steel to create a lightweight, easy-to-install, exterior
wall system. Panels are designed to meet the demands of local building ordinances
where traditional metal wall panels are prohibited. Finish is resistant to
water, cracking, flaking, chalking, and mildew and backed with a 20-year warranty.
TextureClad panels can be attached directly to standard wall girts with up
to 6" of batt insulation and also work great as a soffit.
- 16" wide coverage
- Lengths from 2' to 25'
- Concealed fastener installation
- Economical
- Factory-applied stucco finish
- Color-matched accessories
- Low-maintenance
- Available in 24 unique colors
Glass & Tilt-up Concrete Walls, Stucco, Masonry & Block, Wood & Stone
VP has manufactured thousands of projects where the architect or owner preferred
an alternative to exterior metal panels. To view examples of facilities with
concrete, brick, stucco, glass curtain wall, wood, and stone exteriors, visit
our Hall of Fame.
- VP framing systems allow virtually any type of exterior.
- Architects can design exteriors with wood, stone, or other natural materials.
- VP steel framing provides cost-efficient building solutions even where
other metal walls are unacceptable.
|