Nosing:

SlipNOT^® slip resistant nosings bring safety to steps in every industry. From commercial buildings, food processors, industrial facilities, metal and mining companies, the military and more, non-slip nosings add high traction security to new or existing stair treads. SlipNOT^® nosing can be retrofitted onto any type of slippery step including wood, concrete and metal.

• Thicknesses: As required, 1/8", 3/16", 1/4"
• Widths: Stock widths, 1 1/4" or custom widths
• Lengths: Stock length, 8', 10' or custom lengths
• Angle Bend: 82°, 90°
• Fabrication: Nosings are available cut, formed and / or fabricated to meet project specifications. Fabrication options can include welded mounting supports, shape and specialty cutting or other fabrication as required
• Surface Combinations:
• Aluminum SlipNOT^® on Aluminum
• Stainless Steel SlipNOT^® on Aluminum
• Stainless Steel SlipNOT^® on Stainless Steel
• Steel SlipNOT^® on Aluminum
• Steel SlipNOT^® on Steel
• Surface Grades (Coarseness):
• Grade 1 (Fine) – surface has an average depth of 0.010" – 0.012"
• Grade 2 (Medium) – surface has an average depth of 0.020" – 0.025"
• Grade 3 (Coarse) [available in Steel SlipNOT^® surface only] – surface has an average depth of 0.030" – 0.035"
  *Note, the SlipNOT^® surface is a random stacked-hatch matrix covering 100% of the substrate surface. Surface depths shown are approximate and vary throughout the area of application
• Substrate Alloys: (specialty alloys may be available upon request)
• Steel – A-36, A572 (standard)
• Aluminum – 5052 H32
• Stainless Steel – 304, 316
• Available Finishes:
• Mill (no additional surface finish applied)
• Painted – All SlipNOT^® products may be painted to meet project requirements. Please refer to SlipNOT^® painting guidelines to prevent degradation of the slip resistance of the surface. For steel products, SlipNOT^® offers a water-based paint applied to SlipNOT^® side only. This water-based paint will not provide corrosion protection and is intended for indoor industrial use. Standard color is black. Also available in Gray or Safety Yellow for additional charge. For non-indoor industrial use, material can be primed or painted or hot dipped galvanized
• Galvanized – Hot dipped galvanized finish (A-123). Silvery-zinc color available for Steel SlipNOT^® on Steel substrates only
• Clear Anodized – Clear / transparent anodized surface offers additional corrosion protection. Available for Aluminum SlipNOT^® on Aluminum substrates only
• Care of SlipNOT^® Products: Due to the coarseness of the SlipNOT^® surface, nosings cannot be mopped. Surfaces are best cleaned by power-washing. Accumulated debris can generally be easily removed with a stiff bristle brush. Please see SlipNOT^®'s Care and Cleaning Guidelines for additional information
• Field Fabrication: SlipNOT^® is an all metal surface applied to a metal substrate and it may be treated as any other metal nosing. Nosings may be welded, either directly to the surface or from the opposite side or cut as required. Because of the file-hard surface, it is recommended that nosings be torched, water-jet, laser or plasma-cut. While the surface may be sheared, it will quickly dull shear blades. Also because of the file-hard surface, it is recommended that any forming be performed prior to the SlipNOT^® surface application. Please contact a SlipNOT^® representative for more information regarding fabrication of SlipNOT^® material
• SlipNOT^® Specifications and Advantages: SlipNOT^® exceeds all standards and recommendations for surface coefficient of friction as specified by ADA, ASTM, ANSI, NFPA and OSHA guidelines or regulations. SlipNOT^®'s coefficient of friction is greater than or equal to 0.85. All SlipNOT^® products are registered by NSF International for use in food processing facilities. SlipNOT^® meets and exceeds federal, state and municipal guidelines for minimum slip-resistance standards. Please contact a SlipNOT^® representative for additional information regarding regulations and standards
  
  The SlipNOT^® surface is a molten metal plasma stream deposition which bonds directly to a metal substrate. The surface to substrate has a file hard surface between 55 – 63 on the Rockwell "C" scale (for Steel and Stainless Steel SlipNOT^®) and has a bond strength of at least 4,000 psi (2,000 psi for Aluminum SlipNOT^®.) This combination of extremely high bond strength and surface hardness makes SlipNOT^® the most durable, longest-lasting anti-slip surface available.
• Application and Installation: Nosings are designed for new or existing stairwells to drastically improve the safety of grating treads and stairs in rough use areas and help extend the life of the stairs. Nosings can be bolted or embedded into concrete steps to create permanent safety. Nosing can also be provided with countersunk holes, with anchors, such as J-hooks or Nelson studs, or welded per your specifications. Grating treads nosing welds directly into tread assemblies

Simply call 800/754-7668 (within the United States) or 313/923-0400 to speak to a SlipNOT^® representative. Samples of our products are also available free of charge.

When requesting a quotation, please specify:

1. SlipNOT^® nosings (or product required)
2. Alloy of material (Steel, Aluminum or Stainless Steel)
3. Alloy of SlipNOT^® surface (Steel, Aluminum or Stainless Steel)
4. Finish required (Mill, Painted Black, Galvanized, Anodized, etc.)
5. Material Thickness (1/8", 3/16", 1/4", etc.)
6. Quantity Required
7. Sizes required (length, width, angle bend)
8. Fabrication detail(s) required (i.e. forming, countersunk holes, etc.)
9. Fabrication tolerances required