Ladder Rung:

SlipNOT^® has designed state of the art ladder rungs for top quality construction. Food processing facilities, manufacturing facilities, metal and mining companies, the U.S. military, utility companies and water & waste water treatment plants use SlipNOT^® non-slip ladder rungs to keep their workers safe.

• Thicknesses: As required, 3/4" and 1"
• Lengths: Stock lengths, 10' (for steel), 12' (for aluminum) and 12' (for stainless steel, also available in 11' – 13'), custom lengths can be cut
• Shape: Round, square, or tubes
• Fabrication: Ladder rungs can be flame cut or cut with any standard band saw, chop saw or other means. The surface can be welded and there is no need to grind the ends for assembly. Rungs can be welded directly into the sides of support stringers then painted or galvanized as needed
• Surface Combinations:
  • Aluminum SlipNOT^® on Aluminum
  • Stainless Steel SlipNOT^® on Aluminum
  • Stainless Steel SlipNOT^® on Stainless Steel
  • Steel SlipNOT^® on Aluminum
  • Steel SlipNOT^® on Steel
• Surface Grades (Coarseness):
• Grade 2 (Medium) – surface has an average depth of 0.020" – 0.025"
  *Note, the SlipNOT^® surface is a random stacked-hatch matrix covering 100% of the substrate surface. Surface depths shown are approximate and vary throughout the area of application.
• Substrate Alloys: (specialty alloys may be available upon request)
• Steel – A-36 (standard), A572 Gr50 (bridge steel), CQ (commercial quality)
• Aluminum – 5052, 6061, tempers as available from mill
• Stainless Steel – 304, 316
• Available Finishes:
• Mill (no additional surface finish applied)
• Painted – All SlipNOT^® products may be painted to meet project requirements. Please refer to SlipNOT^® painting guidelines to prevent degradation of the slip resistance of the surface. For steel products, SlipNOT^® offers a water-based paint applied to SlipNOT^® side only. This water-based paint will not provide corrosion protection and is intended for indoor industrial use. Standard color is black. Also available in Gray or Safety Yellow for additional charge. For exterior industrial use, material can be primed or painted or hot dipped galvanized
• Clear Anodized – Clear / transparent anodized surface offers additional corrosion protection. Available for Aluminum SlipNOT^® on Aluminum substrates only
• Care of SlipNOT^® Products: Due to the coarseness of the SlipNOT^® surface, ladder rung surfaces are best cleaned by power-washing. Accumulated debris can generally be easily removed with a stiff bristle brush. Please see SlipNOT^®'s Care and Cleaning Guidelines for additional information
• Field Fabrication: SlipNOT^® is an all metal surface applied to a metal substrate and it may be treated as any other metal ladder rung. Ladder rungs may be welded, either directly to the surface or from the opposite side or cut as required. It is recommended that ladder rungs be torched, water-jet, laser or plasma-cut. While the surface may be sheared, it will quickly dull shear blades. Also because of the file-hard surface, it is recommended that any forming be performed prior to the SlipNOT^® surface application. Please contact a SlipNOT^® representative for more information regarding fabrication of SlipNOT^® material
• SlipNOT^® Specifications and Advantages: SlipNOT^® exceeds all standards and recommendations for surface coefficient of friction as specified by ADA, ASTM, ANSI, NFPA and OSHA guidelines or regulations. SlipNOT^®'s coefficient of friction is greater than or equal to 0.85. All SlipNOT^® products are registered by NSF International for use in food processing facilities. SlipNOT^® meets and exceeds federal, state and municipal guidelines for minimum slip-resistance standards. Please contact a SlipNOT^® representative for additional information regarding regulations and standards
  
  The SlipNOT^® surface is a molten metal plasma stream deposition which bonds directly to a metal substrate. The surface to substrate has a file hard surface between 55 – 63 on the Rockwell "C" scale (for Steel and Stainless Steel SlipNOT^®) and has a bond strength of at least 4,000 psi (2,000 psi for Aluminum SlipNOT^®.) This combination of extremely high bond strength and surface hardness makes SlipNOT^® the most durable, longest-lasting anti-slip surface available.

Simply call 800/754-7668 (within the United States) or 313/923-0400 to speak to a SlipNOT^® representative. Samples of our products are also available free of charge.

When requesting a quotation, please specify:

1. SlipNOT^® ladder rung (or product required)
2. Alloy of material (Steel, Aluminum or Stainless Steel)
3. Alloy of SlipNOT^® surface (Steel, Aluminum or Stainless Steel)
4. Finish required (Mill, Galvanized, Painted, Anodized, etc.)
5. Material Thickness (3/4" and 1", etc.)
6. Quantity Required
7. Sizes / styles required (length, shape)
8. Fabrication detail(s) required
9. Fabrication tolerances required