SlipNOT® Metal Safety Flooring Products represents state of the art technology in slip resistant metal surfaces. SlipNOT® products range from sure-step bar gratings, high traction safety floor plates, permanently safe ladder rungs and rung covers, sure-step stair tread covers and nosing, or anti-slip perforated and expanded metal, SlipNOT® is the one-time answer for increased productivity and the long-term solution for accident-free work zones. SlipNOT® is ideal for wet and/or oily surfaces.
SlipNOT® is a plasma stream deposition process applying molten metal to a metal substrate. This patented process results in a unique random hatch matrix surface, which provides the longest life and maximum slip resistance available. The SlipNOT® surface can typically be applied to material from as thin as 1/8” thickness. SlipNOT® prefers all material to be no wider than 72” and no longer than 144” for plates (longer lengths can be accommodated), and no longer than 288” for grating.
SlipNOT® is bonded to the metal substrate at over 4,000 psi resulting in a surface hardness of over 55 on the Rockwell "C" scale. This combination provides 100% surface coverage for unparalleled durability and traction even in the most demanding environments.
: Steel, Aluminum, and Stainless Steel. Steel products can be offered with a hot dipped galvanized finish.
: SlipNOT® is available in Steel, Stainless Steel, and Aluminum.
- Steel: Steel SlipNOT® is durable and cost effective. It is completely grit free, has a bond strength of over 4,000 psi and surface hardness of over 55 Rc.
- Stainless Steel: Combining chemical resistance, a proven bond strength of over 4,000 psi, and surface hardness of over 55 Rc, the patented SlipNOT® surface on Stainless Steel plate and Stainless Steel grating is the proven choice for even the most demanding environments. Grit-free and NSF registered, Stainless Steel SlipNOT® is ideal for use in the food and chemical industries.
- Aluminum: SlipNOT® ’s Aluminum surface, like all SlipNOT® products, is completely grit-free and the ideal choice for lightweight, rust-free safety. With bond strength of over 2,000 psi, Aluminum SlipNOT® plates and grating provide high traction with lightweight durability.
SlipNOT® is available in three grades: Grade 1- Fine, Grade 2 - Medium and Grade 3 - Coarse.
- Grade 1- Fine:
- The Grade 1 (Fine) surface has an average peak to valley surface depth of 0.010”.
- This grade is used in light duty applications. This surface produces the same high coefficient of friction as our Grade 2 (Medium) and Grade 3 (Coarse). Any surface treatments, such as priming or painting, should not exceed 5 mils to prevent degradation of the SlipNOT® performance. Hot dipped galvanizing is not available for Grade 1 Steel plates.
- Grade 1 (Fine) is available for all SlipNOT surfaces.
- Grade 2- Medium:
- This surface grade is applicable for nearly every situation. With an average peak to valley surface depth of 0.020-0.025”, Grade 2 (Medium) SlipNOT® provides maximum traction, durability, and longevity.
- Surface treatments to this grade should not exceed a total of 10 mils to prevent reduction of the surface coefficient of friction. For steel plates, hot dip galvanizing is the ideal surface protection.
- The Grade 2 (Medium) is the maximum coarseness available for SlipNOT® Aluminum and Stainless Steel surfaces.
- Grade 3- Coarse:
- This surface is used for maximum traction in extremely high traffic or highly contaminated environments. With an average peak to valley surface depth of 0.033-0.036”, Grade 3 (Coarse) SlipNOT® provides maximum durability and longevity.
- This grade is only offered in our Steel SlipNOT® surface.
SlipNOT® finish is available in Mill Finish, Painted and Galvanized.
SlipNOT® Metal Safety Flooring Div.
Div. of W.S. Molnar Co.
2545 Beaufait Street
Detroit, MI 48207 USA
Toll Free: (800) SLIP-NOT
Toll Free: (800) 754-7668
Phone: (313) 923-0400
Fax: (313) 923-4555
E-mail: info@slipnot.com
Web site: http://www.slipnot.com
|