BPW-1110
BPW-1110-1.6
Slimline® Bedpan Washer Water Closet Flushometer, for floor mounted or wall hung top spud bowls. Includes Elbow and Pipe Support for installation when replacing an existing Flushometer with a lower water supply rough-in height (pipe between Elbow and Angle Stop supplied by others). Installation meets ADA height requirements.
- Model BPW-1110 Water Saver (3.5 gpf/13.2 Lpf)
- Model BPW-1110-1.6 Low Consumption (1.6 gpf/6.0 Lpf)
Quiet, Exposed, Diaphragm Type, Chrome Plated Closet Flushometer with the following features:
- Dual Filtered By-Pass
- Diaphragm, Handle Packing, Stop Seat and Vacuum Breaker to be molded from PERMEX™ rubber compound for Chloramine resistance
- ADA Compliant Metal Oscillating Non-Hold-Open Handle with a Triple Seal Handle Packing
- 1" I.P.S. Screwdriver Bak-Chek™ Angle Stop
- 1" I.P.S. Chrome Plated Elbow and Solid Ring Pipe Support
- Free Spinning Vandal Resistant Stop Cap
- Adjustable Tailpiece
- High Back Pressure Vacuum Breaker Flush Connection with One-piece
- Bottom Hex Coupling Nut
- Spud Coupling and Flange for 1Z\x" Top Spud
- Sweat Solder Adapter with Cover Tube and Cast Set Screw Wall Flange
Bedpan Washer Diverter Assembly with the following features:
- Solid One-piece Body Construction
- Solid Brass Spray Arm
- Counter Balanced Pivot Assembly
- Diverter Valve Wall Support
Valve Body, Cover, Tailpiece and Control Stop shall be in conformance with ASTM Alloy Classification for Semi-Red Brass. Valve shall be in compliance to the applicable sections of ASSE 1037, ANSI/ASME 112.19.6, and Military Specification V-29193.
- BG Bio-Gard™ Handle and Spray Arm
- YI Two Wall Bumpers (for open front seat without cover)
SLOAN®
10500 Seymour Avenue
Franklin Park, IL 60131-1259
Tel: 800-9-VALVE-9 (800-982-5839)
Fax: (847) 671-4380
Toll Free Fax: 800-447-8329
|