Concealed Hydraulically Operated Water Closet Flushometer, for floor mounted back spud bowls.
- Model 940 Water Saver (3.5 gpf/13.2 Lpf)
- Model 940-1.6 Low Consumption (1.6 gpf/6.0 Lpf)
Quiet, Concealed, Diaphragm Type, Rough Brass Closet Flushometer for either left or right hand supply with the following features:
- Dual Filtered By-pass
- ADA Compliant Non-Hold-Open feature type Actuator (specify Actuator type listed below)
- 1" I.P.S. Wheel Handle Bak-Chek™ Angle Stop
- Adjustable Tailpiece
- Vacuum Breaker Flush Connection
- Double Slip Elbow Flush Connection for 1Z\x" Exposed Back Spud
- Sweat Solder Adapter
- Spud Coupling, Wall and Spud Flanges
- Diaphragm, Stop Seat and Vacuum Breaker to be molded from PERMEX™ rubber compound for Chloramine resistance
- Exposed parts Chrome Plated
- Valve Body, Cover, Tailpiece and Control Stop shall be in conformance with ASTM Alloy Classification for Semi-Red Brass. Valve shall be in compliance to the applicable sections of ASSE 1037, ANSI/ASME 112.19.6, and Military Specification V-29193.
Specify the “L” Dimension for the proper length of the Flush Connection. The “L” Dimension is equal to the Wall Thickness (to the nearest whole inch) plus 2-3/4".
- FW Fixture Wall Actuator (HY-33-A) (rear access required)
- MP Metal Partition Actuator (HY-49-A)
- SW Side Wall Mounted Actuator (HY-72-A)
- MBFW Metal Button Fixture Wall Actuator (HY-100-A) (rear access required)
- MBPM Metal Button Panel Mount (HY-108-A)
See Actuator Specification pages in this section for details on Actuators.
- TP Trap Primer Elbow
- YI Two Wall Bumpers (for open front seat without cover)
See Accessories Section of the Sloan catalog for details on these and other Flushometer variations.Hydraulic Flushometer can also be provided in Regal® Models. All rough-in dimensions remain the same. Consult the factory.
SLOAN®
10500 Seymour Avenue
Franklin Park, IL 60131-1259
Tel: 800-9-VALVE-9 (800-982-5839)
Fax: (847) 671-4380
Toll Free Fax: 800-447-8329
|