Exposed chrome-plated brass Flushometer is factory-set to deliver 1.6 gpf
(6.0 Lpf) to floor-mounted or wall-hung top spud closet. Quiet Flushometer
specifically engineered for salt water and severe water conditions offers the
following features: metal lever handle; 1" I.P.S. screwdriver Bak-Chek™ angle
stop; vandal-resistant stop cap; adjustable tailpiece; vacuum breaker flush
connection; and spud coupling and flange for 1-1/2" top spud. Flushometer
does not require any water pressure to positively shut off. Valve Adjustment
ranges between 0.5 gpf (1.9 Lpf) and 16.0 gpf (60.6 Lpf). Factory settings
made at 40 psi (275 kPa). Flush volume will vary with pressure and flow rate.
Variations available include -GJ (Ground Joint Stop), -K (Wheel-handle Control
Stop), -U (1-1/4 " Flush Connection and Spud Coupling), -XYV (Less Vacuum
Breaker), -YB (Sweat Solder Adapter Kit), -YBYC (Sweat Solder Adapter and Cast
Set Screw Wall Flange), -YG (Extended Bumper on Angle Stop for seat with cover),
and -YO (Bumper on Angle Stop for open front seat without cover). Ground Joint
Stop (-GJ) recommended for salt water applications. Vacuum Breaker usually
not required when used with non-potable water (specify -XYV Variation). NOTE:
Bak-Chek Angle Stop available with 1" Whitworth Thread (please specify).
Valve Body, Cover, Tailpiece and Control Stop shall be in conformance with
ASTM Alloy Classification for Red Brass. Valve shall be in compliance to the
applicable sections of ASSE 1037, ANSI/ASME 112.19.6, and Military Specification
V-29193.
SLOAN®
10500 Seymour Avenue
Franklin Park, IL 60131-1259
Tel: 800-9-VALVE-9 (800-982-5839)
Fax: (847) 671-4380
Toll Free Fax: 800-447-8329
|