Exposed, Battery Powered, Sensor Activated, Crown® Optima® SMOOTH™ Water Closet Flushometer for floor mounted or wall hung top spud bowls. Valve cannot be converted to exceed a low consumption flush (1.6 gpf/6.0 Lpf maximum with piston change).
- Model 111-1.2 Low Consumption (1.2 gpf/4.5 Lpf)
Note: Valve may not function with all bowls. Be sure to verify flow requirements with bowl manufacturer or call Sloan Valve Company.
Quiet, Exposed, Piston Type, Chrome Plated Closet Flushometer with the following features:
- Fixed Volume Piston with Filtered O-ring Bypass
- ADA Compliant Metal Oscillating Non-Hold-Open Handle with Triple Seal Handle Packing
- 1” I.P.S. Screwdriver Bak-Chek™ Angle Stop
- Locking Vandal Resistant Stop Cap
- Adjustable Tailpiece
- High Back Pressure Vacuum Breaker Flush Connection with One-piece Bottom Hex Coupling Nut
- Spud Coupling and Flange for 1fi” Top Spud
- Sweat Solder Adapter w/Cover Tube and Cast Wall Flange w/Set Screw
- High Copper, Low Zinc Brass Castings for Dezincification Resistance
- Valve designed to accept Low and Ultra-Low Consumption Pistons only to ensure Water Conservation
- Non-Hold-Open Handle, Fixed Metering Bypass and No External Volume Adjustment to Ensure Water Conservation
- Handle Packing, Main Seat, Stop Seat and Vacuum Breaker to be molded from PERMEX™ Rubber Compound for Chloramine Resistance
- ADA Compliant OPTIMA® SMOOTH™ Battery Powered Infrared Sensor for automatic “Hands-free” operation
- Sensor with Automatic Range Adjustment
- Chrome Plated Metal Sensor Housing
- Mechanical Manual Override Flush Handle
- Four (4) Size C Batteries included
- “Low Battery” Flashing LED
- “User in View” Flashing LED
- 25 to 80 psi Operating Range
Valve Body, Cover, Tailpiece and Control Stop shall be in conformance with ASTM Alloy Classification for Semi-Red Brass. Valve shall be in compliance to the applicable sections of ASSE 1037, ANSI/ASME A112.19.2, and Military Specification V-29193.
- TP Trap Primer
- YG Extended Bumper on Angle Stop (for seat with cover)
Sloan SMOOTH™ equipped Flushometers provide theultimate in sanitary protection and automatic operation.There is no need for AC hookups or wall alterations. The Flushometer operates by means of a battery powered infrared sensor. Once the user enters the sensor’s effective range and then steps away, the SMOOTH™ Unit initiates the flushing cycle to flush the fixture. State-of-the-art Technology enables activation of a manual override without “double flushing” occurring as the user departs (locks out sensor for approximately 10 seconds).
The Crown® Optima® SMOOTH™ Flushometer is thenext advancement in hygiene. It uses sensor technology to transform manual installations into electronic, hands-free operation. User makes no physical contact with the Flushometer surface except to initiate the Override Handle when required. Helps control the spread of infectious diseases.
Automatic operation provides water usage savings over other flushing devices. Reduces maintenance and operation costs. Installation and battery replacement does not require turning off water to the valve.
3 year (limited)
SLOAN®
10500 Seymour Avenue
Franklin Park, IL 60131-1259
Tel: 800-9-VALVE-9 (800-982-5839)
Fax: (847) 671-4380
Toll Free Fax: 800-447-8329
|