Sweets

GL1 2000 lb. Electromechanical Gate Lock

The GL1 Electromechanical Gate Lock is designed to secure a wide variety of vehicle and pedestrian gate applications where security and weather resistance are required. The GL1 functions equally well in both electrically and manually operated gate installations and can be used for swing gates, sliding gates, stock cage gates or other applications.

Features and Benefits

• 2,000 lbs. holding force
• Operates under preload up to 100 lbs.
• Automatic dual voltage - no field adjustments required
• Fail Secure convertible to Fail Safe
• Manual key override (right or left hand)
• Self-aligning receiver (+/- 1/2" horizontally and vertically) helps compensate for gate misalignment and sag
• Includes latch status monitor
• Tamper Proof cast aluminum housing
• Heavy wall 1/2" inside diameter threaded steel coupling
• Hardened steel latch
• Surface mount
• Black Powder coated finish
• Weather resistant

Specification Data

Holding Force: 2000 lbs. [907kg.]
Current Draw and Voltage: 12 Volts Initial (peak): (~1.0 sec.) @ 870 mA - Reduced: 290 mA
Power Consumption: 3.5 Watts
24 Volts Initial (peak): (~1.0 sec.) @ 720 mA - Reduced: 170 mA
Power Consumption: 4.1 Watts
Operating Temperature:-58 to +167F [-50 to +75C]
Shipping Weight: 6lbs.
Warranty: MagnaCare Lifetime Replacement Warranty

M62FG 1200lb Holding Force Gate Magnalock^®

1200lb. holding force weatherproof Magalock with automatic dual voltage. Recommended for high security fence gates and electrically operated sliding gates.

Features and Benefits

• Patented instant release circuit - no residual magnetism
• Fully sealed electronics - tamper proof and weatherproof
• Ten feet [3.05m] of jacketed, stranded conductor
• Automatic dual voltage - no field adjustment required
• Universal threaded conduit fitting is 1/2" female - 3/4" male
• Available with BondSTAT Magnetic Bond Sensor
• UL Listed

Specification Data

Holding Force: 1,200 lbs. [544 Kg.]
Current Draw and Voltage:
250mA at 12VDC; 125mA at 24VDC
Operating Temperature: -40 to +140F [-40 to +60C]
Shipping Weight: 11 lbs.
Warranty: MagnaCare Lifetime Replacement Warranty

(SASAM) Shock Absorbing Strike Mount Kit

Used to control excessive impact between the strike and Magnalock in gate applications. This simple parts kit converts any M32, M62 or M82 strike plate. Will greatly extend the life of the maglock and additional gate hardware.