Hurricane LouversRuskin's new Hurricane Louvers hold up under pressure in severe weather by preventing wind and rain damage. These louvers are built to withstand 160 psf windloads and nearly 9" per hour rainfalls. They are also the FIRST louvers in the industry to have gained approval in Miami-Dade County.
ELC6375DXD : Combination Hurricane Louver The ELC6375DXD Combination louver is Miami-Dade and Florida Product Approved. It combines drainable stationary blades and operable airfoil damper blades in a single 6" deep frame. Features: - Impact resistant
- Approved for use in all of Florida including the High Velocity Hurricane Zone (HVHZ)
- Approved for use in both open and closed structures with provisionsto manage weather infiltration
- Miami-Dade NOA 08-1211.05, FL Approval 12232.1
- ±110 psf windload
- AMCA licensed air & water performance
- 44% Free Area
- Blade and jamb seals
- Tested installation method (see installation instructions)
- Unlimited width x 120” high field assembly size
ELF375DFL : Stationary Louver The ELF375DFL Stationary Louver is UL listed for windload resistance and Florida Product Approved for compilance to the Florida Building Code. It has a 4" deep frame and a 37 1/2 degree blade angle. It features: - Suitable for use in non-impact resistant applications with windloads up to +50 psf.
- AMCA licensed air and water performance.
- Tested installation method with installation instructions to assist installers.
- Florida Product Approval number FL11637 (2007 code version).
ELF375DXD : Extruded Aluminum Hurricane Louver The ELF375DXD Stationary Louver is Miami-Dade County Approved. It has a 4" deep frame and a 37 1/2 degree blade angle. It features: - Approval for use in open structures with provisions to manage weather infiltration
- Maimi-Dade NOA # 07-0621.07
- Florida Product Approval # 10234.1 (2007 code version)
- AMCA certified for Air and Water Penetration performance
- Impact resistance
- ±130 psf windload
- 49% Free Area
- Beginning point of water penetration 1,055 fpm free area velocity
- Drainable blades and frames
- Aluminum construction for low maintenance and high resistance to corrosion
- Available with a variety of Kynar paint or Anodize finishes
ELF6375DFL : Stationary Louver The ELF6375DFL Stationary Louver is UL listed for windload resistance and Florida Product Approved for compliance to the Florida Building Code. It has a 6" deep frame and a 37 1/2 degree blade angle. It features: - Suitable for use in non-impact resistant applications with windloads up to +50 psf.
- AMCA licensed air and water performance.
- Tested installation method with installation instructions to assist installers.
- Florida Product Approval number FL6068 (2004 code version)
ELF6375DXD : Miami-Dade County Approved Stationary Louver The ELF6375DXD Stationary Louver is Miami-Dade County Approved. It has a 6" deep frame and a 37 1/2 degree blade angle. It features:
- Approval for use in open structures with provisions to manage weather infiltration.
- Approval for use in closed structures with provisions to manage weather infiltration when combined with optional CD102 or CD50 control dampers.
- Maimi-Dade NOA numbers:
- 06-0602.04 - ELF6375DXD and ELF6375DXD/CD102 combilion
- 06-0320.12 - ELF6375DXD/CD50 combination
- Florida Product Approval numbers (2001 code version):
- FL 3283.1 - ELF6375DXD
- FL 3283.2 - ELF6375DXD/CD102 combination
- FL 3285.1 - ELF6375DXD/CD50 combination
EME520MD : Wind Driven Rain Resistant Stationary Louver The EME520MD Wind Driven Rain Resistant Stationary Louver is Miami-Dade County Approved for high windload and impact resistance. It provides Class A AMCA wind driven rain resistance to minimize rain infiltration. It also utilizes Ruskin's UFF Universal Flange Frame system for quick and easy installation in most any kind of wall construction. The EME520MD features: - Miami-Dade NOA #05-0812.07
- Approval for use in open structures with provisions to manage weather infiltration.
- Missile impact resistant.
- Designed to withstand up to ±140 psf windload.
- AMCA Class A wind driven rain resistance (99.7% effective) at 1,327 fpm free area velocity.
- UFF frame eliminates anchors into the walls and provides the fastest installation method available.
EME6325D : Hurricane Louver The EME6325D is Miami Dade and Florida approved. This 6" deep vertical louver passed the TAS-100A wind driven rain test without a damper or sloped duct at rear. It features: - AMCA Certified Class A 99.9% effective ratio wind driven rain performance at both 29 mph and 50 mph.
- Tested to the following FBC/Miami Dade County Test protocols.
- TAS-100A Wind Driven Rain Test
- TAS-201 Large Missile Impact Test
- TAS-202 Uniform Static pressure
- TAS-203 Cyclic Pressure Test
- Approved for locations up to 33 ft. above grade for "dry" room locations.
- AMCA Certified Air and Water Penetration.
- Maximum windload ±150PSF (±7.18 KPa).
- Aluminum clip angle installation.
EME6625D : Miami-Dade County Approved Stationary Louver The EME6625D Stationary Louver is Miami-Dade County Approved. Its frame is 6" deep and it has vertical blades. It features: - Approval for use in open structures with provisions to manage weather infiltration.
- Approval for closed structures with or without provisions to manage weather infiltration When combined with optional CD50 Damper.
- Miami-Dade NOA #06-1205.08 for EME6625D and EME6625D/CD50 combination
- Florida Product Approval numbers (2001 code version):
- FL 3286.1 - EME6625D
- FL 3286.2 - EME6625D/CD50 combination
PHB6375DXD : Louvered Hurricane Penthouse The PHB6375DXD Hurricane Penthouse features: - Approval for use in open structures with provisions to manage weather infiltration.
- Impact resistance
- Miami-Dade NOA # 03-0701.05
- Florida Product Approval number FL 3287.1
- Maximum design windload +68 psf
- Cable tie-downs
- Protects roof openings
PHB637HDXD : Hurricane Penthouse The PHB637HDXD Hurricane Penthouse features: - Approval for use in open structures with provisions to manage weather infiltration.
- Impact resistance
- Miami-Dade NOA # 06-1101.08
- Florida Product Approval number FL 10235.1
- Maximum design windload +110 psf
- Front Installation (no cables)
- Hinged Roof
- 7’ x 8’ Inside Throat x 7’ Tall Max Size
- Protects roof openings
PHB6625D : Hurricane Penthouse The PHB6625D Hurricane Penthouse features: - Approval for use in open structures with provisions to manage weather infiltration
- Wind Driven Rain Resistant louvers to minimize water penetration
- Impact resistance
- Miami-Dade NOA #08-1003.05
- Maximum design windload +110 psf
- Front Installation (no cables)
- Hinged Roof
- 7' x 8' Inside Throat x 4' Tall Max Size
- Protects roof openings
Ruskin Manufacturing
3900 Dr. Greaves Rd.
Kansas City, MO 64030
Tel: (816) 761-7476
Fax: (816) 761-1936
E-mail: ruskin@ruskin.com
Web site: http://www.ruskin.com
|