Rixson^® electromagnets are designed for virtually any remote door release application. They are primarily used to hold fire and smoke barrier doors open until released by a remote smoke detector or other switching device. The complete assembly consists of an armature contact plate with adjustable pivot mounting for installation on the door, and a heavy-duty electromagnet mounted on the wall or floor behind the door. A separate closing device is required.

Features

• 25 to 40 pounds holding power
• Fail-safe operation; power failure releases door to close
• Positive Release Button initiates closing motion
• Two-year warranty
• Multi-voltage on specific coil models
• Magnet protected against transients and surges up to 600 volts (AC models)

Code Listings

• Underwriters’ Laboratories, Inc.
• Underwriters’ Laboratories of Canada
• California State Fire Marshal
• ANSI/BHMA 156.15

Finishes

• 689 Sprayed Aluminum (SA)
• 690 Sprayed Dark Bronze (SB)
• 691 Sprayed Light Bronze (SLB)
• 696 Sprayed Gold (SG)

Installation

• Install where required by code, where doors may be used to confine smoke or fire, or wherever remote control or automatic closing doors are required.
  
• Be sure door hardware and trim projections are compatible with total projection of door release.
  
• Anchor the electromagnet firmly since the wall portion will function as a door stop.
  
• Locate magnet approximately 6 inches in from lock edge of door. Wall magnets should be mounted approximately 2 to 4 feet above the floor for optimum performance.
  
• Door-mounted contact plate includes hardware for through-bolting or concealed mounting.
  
• Spotting template included with unit ensures correct alignment.
  
• 14AWG. Max. Wire Size.