ControlHoist™ Optima Garage Door Operators
ControlHoist™ OPTIMA with gear-drive provides reliable and efficient operation. They are designed for larger doors and higher-cycle applications.
All ControlHoist OPTIMA Jackshaft and Trolley Operators feature:
- A continuous-duty, overload protected motor
- High starting torque motor and worm-gear-in-oil bath reducer
- Available in 1/2, 3/4, 1, 1-1/2 or 2 horsepower for 115/230 single phase and 208-230/460 volt three phase.
- The output shaft features heavy-duty, industrial ball bearings
- Auxiliary connections for a variety of controls and reversing devices
Jackshaft models also feature:
- An electrical interlocked manual chain hoist
- Factory gear-matched to keep door speed within recommended limits
Jackshaft Operators
Jackshaft operators are usually mounted to the wall either alongside or above a rolling or sectional door. Used primarily for rolling doors, Jackshaft operators are also used for sectional doors with vertical lift and lift clearance track.
Trolley Operators
Trolley operators are mounted overhead and suspended from a ceiling. Used exclusively for sectional doors, trolley operators are suitable in both normal and low headroom applications.
Product Details
|
|
|
|
| Operation Mode |
|
Trolley or Jackshaft
|
|
| Duty Cycle |
|
30 Cycles/Hour
|
|
| Drive |
|
Gear
|
|
| Environmental Options |
|
NEMA 1
|
|
| Motor |
|
Continuous Duty - 1/2, 3/4, 1, 1-1/2, 2 hp
|
|
| Logic |
|
Solid State
|
|
| Power |
|
115/230 Single Phase, 208-230/460 Three Phase
|
|
| Brake |
|
Electro-Mechanical Type
|
|
| Wiring Options |
|
24V Class 2, On-Board Selection
|
|
| Warranty |
|
2 years
|
|
Raynor
P.O. Box 448
Dixon, Illinois 61021
Fax: (800) 323-7896
Tollfree: (800) 472-9667
E-mail: thegarage@raynor.com
Website: http://www.raynor.com
|