LEVEL-RIGHT® FS-10
Another superior product from
Maxxon Corporation
920 Hamel Road
P. O. Box 253
Hamel, MN 55340
Tel: (763) 478-9655
Toll-Free: (800) FLOOR-20 (356-6720)
Fax: (763) 478-9695
E-mail: info@rapidfloor.com
Web site: www.rapidfloor.com
Levels, Smoothes, Repairs 0-10 mm (0 -
3/8"), FAST
When the job calls for a new floor that's smooth,
level and super fast-setting, Level-Right® FS-10 comes to the rescue.
Ideal for thin-topping applications over concrete, it provides a smooth, level
new surface that dries fast to keep your job on schedule, and to allow for placement
of floor goods soon after application.
-
New construction or renovation
-
Levels entire floors or transition areas,
featheredge to deepfill
-
Resurfaces old or damaged concrete floors
-
Up to 7200 PSI (50 MPa), hydraulic cement
-
Water resistant
-
Caps cracked, lightweight concrete
-
Above, on, or below grade
-
Fills "duck ponds" in concrete floors
-
No troweling required
-
Provides a temporary wear surface in as little
as two to four hours after application
-
Experienced, authorized applicators worldwide
-
Exceeds standards set by leading floor goods
manufacturers
-
Easy mixing-just add water
-
Can be barrel-mixed or used in any continuous
pumping machine
Level-Right® FS-10 Underlayment
CSI
Formatted Specifications for the following applications are available:
- For Topping Concrete Floors
Rapid Floor® Systems
LEVEL-RIGHT® FS-10 TECHNICAL DATA
SHEET
Compressive Strengths
Modified ASTM C 109 |
| Typical: |
1,500 PSI (10.3 MPa) 1 day |
|
5,270 PSI (36.2 MPa) 7 days |
|
5500-7200 PSI (38-50
MPa) 28 days |
|
Freeze/Thaw Resistance
ASTM C 666 |
90% +/-3% |
| Dry Density |
Approx. 120-125 lbs/ft³
(1922-2003 kg/m³) |
Tensile Strength
ASTM C 190 |
1200 PSI (8.3 MPa) (28
days) |
| Abrasion |
ASTM Taber 250 Cycles
1,000 gram load on H 22, 4" wheels:
wt. loss 0.30 gram |
Shear Bond Strength
with
Concrete
ASTM C 882-91 |
1060 PSI (7.3 MPa) 56
days |
Shear Bond Strength
with
Level Right FS-10
ASTM C 882-91 |
3160 PSI (21.7 MPa)
56 days |
|