Rangine Corporation/Rakks
330 Reservoir Street
Needham, MA 02494
Toll-Free: (800) 826-6006
Fax: (781) 455-8702
E-mail: sales@rakks.com
Web site: http://www.rakks.com
Rakks Wall Standards
are made of extruded aluminum with precision channels that accept Rakks Shelf
Support Brackets. Standards are available in five profiles to meet a variety
of surface and recess mounted applications.
Standards can be specified in any length up to twelve feet. Standards come
with drilled and countersunk holes to accept color matched mounting screws (No.
6 x 1 1/4" Philips flat-head), which are included. When properly installed,
screw heads are flush with the back of the channel allowing shelf brackets to
be positioned at any point.
Standards must be screwed into studs, blocking, or into wall anchors sized
for No. 6 screws. Toggler® Brand AF-6 wall
anchors are recommended. Brackets should be mounted at least 6" from the
top of the standard to better distribute the load. Shelf brackets can be mounted
at the very bottom of a standard.
C-STANDARD
Our most basic extruded aluminum wall standard used for either surface or
recess mounted applications.
M-STANDARD
A decorative profile used for surface mounted applications. The 1 3/4" wide
profile and flared sides make a dramatic vertical statement.
E-STANDARD
An extruded aluminum wall standard designed to be recess mounted between 5/8"
drywall panels. The front flanges cover the rough-cut edge of the drywall.
G-STANDARD
Designed to be mounted between 1/4" glass mirror or wood panels. The
front flanges cover the panel edge.
D-STANDARD
Two channels allow for independent adjustment of shelves in both continuous
and staggered configurations.
additional information available at rakks.com
|