Rangine Corporation/Rakks
330 Reservoir Street
Needham, MA 02494
Toll-Free: (800) 826-6006
Fax: (781) 455-8702
E-mail: sales@rakks.com
Web site: http://www.rakks.com
Rakks Handrail System 700
beautifully combines the strength and economy of extruded aluminum with solid
wood components to provide a sturdy, attractive and cost effective solution
for handrail and crashrail applications. Expertly sanded and finished hardwood
components, including inside and outside corners, and ends create an ergonomic
design.
Wood components and trim are available in oak, maple, cherry and mahogany
in either clear or stained finishes. The aluminum railing body is available
in clear and black anodized aluminum or in custom powder finishes, creating
hundreds of possible color combinations.
A two-piece mounting bracket allows for easy installation and removal. Mounting
brackets also function as a spline— allowing multiple pieces to be joined
for long runs.
Rakks Handrail Mounting Brackets
consist of two heavy gauge aluminum parts; one which is attached to the wall
and the other to the handrail prior to installation. The unique design of this
bracket system compensates for a wide margin of installation error and wall
irregularities. Oval slots, in perpendicular axes to
each other, provide an automatic adjustment of up to 1/2" to achieve a
quality installation.
SYSTEM 700
This 7" handrail system meets or exceeds all major building codes as
well as ADA requirements for handrails. Solid wood trim offers a secure and
ergonomic gripping surface. Extruded aluminum body provides maximum strength
to protect walls from carts and other damage.
HR-303 HANDRAIL MOUNTING BRACKET
Manufactured from 6063 extruded aluminum this two-piece bracket is used to
install 5" nominal height railings. Brackets should be mounted at a maximum
spacing of 36 inches into studs or blocking. Stocked in clear anodized aluminum.
Mounting hardware (#14 Philips flat head screws and 1/4" carriage bolt
and lock nut) included.
HR-203 HANDRAIL MOUNTING BRACKET
Manufactured from #380 cast aluminum alloy, this two-piece bracket is used
to install 7" nominal height railings. Brackets should be mounted at a
maximum spacing of 36 inches into studs or blocking. Stocked in rollbrite polished
aluminum finish. Mounting hardware (#14 Philips flat head screws and 1/4"
carriage bolt and lock nut) included.
additional information available at rakks.com
|