Rangine Corporation/Rakks
330 Reservoir Street
Needham, MA 02494
Toll-Free: (800) 826-6006
Fax: (781) 455-8702
E-mail: sales@rakks.com
Web site: http://www.rakks.com
Rakks Counter Support Brackets
provide a practical low cost and easy to install alternative to full-height
laminated panel supports. They support counters up to 30" deep while providing
open space under the entire length– improving both handicap accessibility
and ergonomics. Counter Brackets are available in either surface or flush-mounted
configurations. Rakks Sill Supports provide low-profile support or bracing for
shelves or sills.
EH-1212
Used to support counters up to 18" deep or incorporated into casework
to provide structural bracing. Brackets can be easily cut down in the field
to accommodate shorter counters.
EH-1818
For counter up to 25" deep, brackets should be screwed into blocking
or studs at a maximum spacing of 48 inches. 2" wide mounting surface provides
extra support where counter sections join.
EH-1824
Used to support up to 30" deep counters. These lightweight and easy-to-ship
brackets are manufactured from 2" x 3" “T” to provide
maximum stiffness. When the 24" leg is against the wall, this bracket can
also be used to support 24" deep counters.
FLUSH MOUNT
Used in applications requiring a nearly invisible support, any EH bracket
can be ordered in the flush mount configuration. Flush mount brackets use a
2" x 2" x 1/4" L-shaped vertical leg that is screwed to the side
of the stud. After installation of the bracket, drywall is mounted to the studs,
hiding the vertical support leg.
BENCH MOUNT
Used for benches incorporating 5" wooden planking. The supporting arm
is pre-drilled with 12 holes to provide secure installation. Wall-mounted design
keeps floor unobstructed and easy to clean. Manufactured from 2" x 3"
“T” to provide maximum stiffness.
SILL SUPPORT
Manufactured from structural aluminum angle, these brackets can be used anywhere
low profile support or bracing is required.
additional information available at rakks.com
|