|   |   | 

L-Bracket Shelving System



L-Bracket Shelving System


L-Bracket Shelving System

Offering a dramatic new look in pole-mounted shelving, the Rakks L-Bracket system, US Patent #7,506,852, provides unparalleled design flexibility, strength and value. Available in floor to ceiling and wall-supported configurations this new design features quick and infinite shelf adjustment utilizing one hidden screw. L-brackets support wood, glass or aluminum shelves up to 24” deep. Cabinets can be easily attached to the poles to create attractive wall storage units and room partitions. The L-Bracket system is stocked in clear anodized, black anodized and white powder-coat finishes.


L-Bracket Shelving System

PC2 SUPPORT POLE

Used for creating shelving units with or without a supporting wall. Adjustable threaded mounts allow pole to be installed under compression between floor and ceiling. Threaded side channels accept 1/4-20 screws to mount L-Brackets or cabinets. C channels accept all other Rakks brackets and pole accessories..


L-Bracket Shelving System

L-BRACKETS

L-Brackets, US Patent #7,506,852, attach to PC2 poles with one 1/4” –20 screw. When used with 3/4” thick shelves the mounting hardware is hidden. Available for shelves from 8” to 24” deep in 2” increments. Wood shelves can be screwed to the brackets using pre-drilled and counter-sunk holes. Model BL-XX (XX denotes shelf depth in inches)


L-Bracket Shelving System

RETAINING PIN OPTION

L-Brackets can be ordered with retaining pins on each end to accommodate Rakks extruded aluminum shelves.


L-Bracket Shelving System

MITERED TIE-POLES

Mitered tie poles can be used in applications where floor to ceiling installation is not practical or desired. Pole-to-pole and pole-to-wall connections are made using anchor brackets secured with set screws. Tie-Pole kits are sized to accommodate all L-Bracket sizes. Model MT-PC2-XX (XX denotes shelf depth in inches)


L-Bracket Shelving System

THREADED MOUNT

Adjustable mounts install into threaded inserts at the top and bottom of PC2 poles. These non-marking mounts adjust to provide floor-to-ceiling compression. Top mounts have two holes to facilitate additional anchoring into ceiling.

Note:poles should be cut 3" shorter than the finished floor-to-ceiling height.

Rangine Corporation/Rakks
330 Reservoir Street
Needham, MA 02494
Tollfree: (800) 826-6006
Fax: (781) 455-8702
E-mail: sales@rakks.com
Web site: http://www.rakks.com





 |   |   |