Counter Support BracketsCounter Support Brackets FeaturesRakks Counter Support Brackets provide a practical low cost and easy to install alternative to full-height laminated panel supports for counter mounting and counter installation. They support counters up to 30" deep while providing open space under the entire length–improving both handicap accessibility and ergonomics. Counter Support Brackets are available in either surface or flush-mounted configurations. Rakks Sill Supports provide low-profile support or bracing for shelves or sills.
EH-1209 Used to support counters up to 13" deep or incorporated into casework to provide structural bracing. Brackets can be easily cut down in the field to accommodate shorter counters.
EH-1212 Used to support counters up to 18" deep or incorporated into casework to provide structural bracing.
EH-1818 For counter up to 25" deep, brackets should be screwed into blocking or studs at a maximum spacing of 48 inches. 2" wide mounting surface provides extra support where counter sections join.
EH-1824 Used to support up to 30" deep counters. These lightweight and easy-to-ship brackets are manufactured from 2" x 3" “T” to provide maximum stiffness. When the 24" leg is against the wall, this bracket can also be used to support 24" deep counters.
FLUSH MOUNT Used in applications requiring a nearly invisible support, any EH bracket can be ordered in the flush mount configuration. Flush mount brackets use a 2" x 2" x 1/4" L-shaped vertical leg that is screwed to the side of the stud. After installation of the bracket, drywall is mounted to the studs, hiding the vertical support leg.
ECLIPSE BRACKET Rakks Eclipse Brackets can support counters or shelves up to 18 inches deep. This attractive low-profile design is easy to install with no visible hardware. Machined aluminum ends provide a smooth and near-seamless termination. Stocked in clear and black anodized finishes, Eclipse Brackets can support loads up to 300 pounds per pair.
VANITY BRACKET These made-to-order brackets support sinks and provide a stable mounting surface for custom-built enclosures. Wooden strips on the front faces of the bracket provide a convenient mounting surface for laminated or solid surface panels.
SLANT MOUNT Used in applications requiring an angled surface, any EH bracket can be ordered in the slant mount configuration. Please specify size and angle.
BENCH MOUNT Used for benches incorporating 5" wooden planking. The supporting arm is pre-drilled with 12 holes to provide secure installation. Wall-mounted design keeps floor unobstructed and easy to clean. Manufactured from 2" x 3" “T” to provide maximum stiffness.
SILL SUPPORT Manufactured from structural aluminum angle, these brackets can be used anywhere low profile support or bracing is required.
Vanity Bracket Rakks Vanity Brackets simplify and reduce the cost of installing sinks with millwork enclosures. Manufactured to order, they can be easily customized to meet specific project or accessibility requirements. Vanity Brackets are supplied with wooden strips on the front faces to provide convenient mounting, or removal, of laminated or solid surface panels. Manufactured from TIG welded structural aluminum, Vanity Brackets can support loads up to 450 pounds and counter depths up to 30 inches. For information on Rakks Vanity Brackets, Counter Supports and Shelving Systems visit rakks.com or call us at 800-826-6006.
Rangine Corporation/Rakks
330 Reservoir Street
Needham, MA 02494
Tollfree: (800) 826-6006
Fax: (781) 455-8702
E-mail: sales@rakks.com
Web site: http://www.rakks.com
|