Plasti-Fab -Radon Guard® Insulation

DOWNLOADS

Radon Gas is naturally occurring, and moves up out of the ground into a structure through cracks in the foundation or slab. According to Health Canada, Radon Gas is the second leading cause of lung cancer.


Category: foam board insulation | foam insulation | radon insulation...

MasterFormat: Thermal Protection | Thermal Insulation | Board Insulation



Plasti-Fab
#300, 2891 Sunridge Way NE
Calgary, AB T1Y 7K7
Tel: (888) 446-5377

mailbox@plastifab.com

https://www.plastifab.com/

Find a rep/distributor

Request More Info

DOWNLOADS

Related Products

Overview


Radon Guard® Insulation

Radon Gas is naturally occurring, and moves up out of the ground into a structure through cracks in the foundation or slab. According to Health Canada, Radon Gas is the second leading cause of lung cancer. New building codes require new construction to have a radon mitigation system in place.

Radon Guard® Insulation is a key component for radon mitigation systems and is the code compliant one-to-one replacement for the code-required 100 mm thick layer of granular material. This 2-in-one system both insulates and protects the health of a structure. Manufactured from PlastiSpan HD insulation, Radon Guard has an R-value of 4.04 per inch and compressive strength of 16 psi.

Radon Guard® insulation is a patent-pending sub-slab depressurization panel. Radon Guard allows for soil gas removal, insulates the concrete slab, and provides a capillary break between the ground and the air barrier system. CCMC Evaluation Report 13698-R confirms that the interconnected channels on the underside of Radon Guard insulation provide the required means to direct soil gas to a radon gas mitigation system.

  • Available in 3x4 ft, 2 ft high bundles
  • 3.5”, 4”, 4.5”, 5”, 5.5” thicknesses
  • Also available in 20, HD, 25, 30 and 40 psi

Why Radon Guard® Insulation

Radon Guard® insulation panels installed under a concrete slab allow for the collection of radon gas within the sub-slab space to that it can then be exhausted through a radon mitigation system rather than entering the building.

Radon Guard™ insulation is the code compliant one-to-one replacement for a 100mm thick layer of granular material, the prescriptive solution required by building codes.

Radon Guard is easy to cut and install


See More


Specifications

Material Properties of Radon Guard®
CAN ULC S701.1
Material Properties
Test Method Units Property Values
Thermal Resistance
Minimum RSI per 25mm (R per inch)
ASTM
C518
m20C/W
(ft2•h•0F/BTU)
0.70
(4.04)
Compressive Resistance
Minimum @ 10% Deformation
ASTM
D1621
kPa
(psi)
110
(16)
Flexural Strength
Minimum
ASTM
C203
kPa
(psi)
240
(35)
Water Vapour Permeance
Maximum
ASTM
E96
ng/(Pa.s.m2)
(Perms)
200
(3.5)
Water Absorption
Maximum
ASTM
D2842
% By Volume4.0
Dimensional Stability
Maximum, 7 Days @ 70 ± 2 ℃ (158 ± 4°F )
D2126% linear change1.5
Limiting Oxygen Index
Minimum
D2863%24
Thermal Resistance for Some Common Thicknesses
Millimeters RSI Inches R-Value
190.493/4"2.81
250.651"3.75
380.981 1/2"5.63
501.302"7.50
751.953"11.25
Other Standard & Custom thicknesses available upon request.
Standard sizes range from; 2x4,2x8,4x4,4x8.