RapidSlat™ 626 Series Stormtite™ Service Door
The RapidSlat® Series 626 Stormtite™ Door is perfect for climate controlled situations and applications with weather extremes such as external doors on a food manufacturing facility.
Features
Max. standard width
up to 20' (6096 mm) depending on gauge and slat type
Max. standard height
up to 20' (6096 mm) depending on gauge and slat type
Insulation
R-value of 7.71 for energy-efficiency. U-value of .13 and STC Rating of 21.
Mounting
Intererior or Exterior face of wall
Curtain
Interlocking roll-formed slats, end locks attached to prevent lateral movement; 22 gauge steel Flat Profile type F-265I for doors up to 20' wide; 24 gauge galvanized steel front slats / 24 gauge galvanized steel back slats Slat cavity shall be filled with CFC -free, foam-in-place, polyurethane insulation, R-Value = 7.7, U-Value = .13, Soundrating = STC-21.
Bottom Bar
Two primed, black painted angles (min. thickness 3/16”) with 2-wire, self-monitoring, fail safe, electric sensing edge w/ yellow/black striped vinyl cover
Guides
Structural primed black painted steel, 1/4” min. thickness
Operation
Direct drive hypoid gear motor/brake assembly (20” per sec up speed / 12” per sec down speed); drive assembly and limit sensors are factory pre-assembled; manual crank for power outage
Control Panel
Variable frequency drive controller w/ self diagnostics (time delay self close timer and non-resettable cycle counter included); two line LCD readout, enclosure NEMA 4X rated
Door Roll
Direct driven, springless roll w/ integrated shafts; self aligning greasable sealed bearings; door does not require counterbalance device
Hood
24 gauge galvanized steel primed, black painted; interior hood baffle included
Brackets
Min. ¼” hot rolled primed, black painted steel
Safety Devices
Photoelectric sensors; 2-wire black/yellow striped electric fail-safe sensing edge; automatic stop-lock brake
Actuator
Single open/close/stop push button station incorporated into Control Panel
Curtain Finish
Gray or tan powdercoat w/ “anti-graffiti” hardening additive
Windload
20 psf when wear strips are not specified
Options
- Flat Profile type F-265I for doors up to 20’ wide also available in:[Front Slat] 22, 20, 18 ga. galvanized steel; 22, 20 ga. stainless steel; .040” Aluminum. [Back Slat] 22 ga. steel; 24 ga. stainless steel; .024” aluminum
- Bottom Bar also available in: galvanized steel; stainless steel; aluminum
- Guide options include galvanized steel, powder coat steel, and stainless steel. Hood also available in: powder coat; stainless steel; aluminum. Sloped Hood also available.
- Brackets also available in: powdercoat; galvanized steel; stainless steel
- Direct Drive motors available in 1/2 HP, 1 HP, 2 HP, and 208/230/460 VAC 3-phase
- Dual photoelectric sensors available for safety
- Optional push buttons, loop detectors, radio control, motion detectors, or any combination thereof available for door operation/control
- Powder coat paint finish in 197 standard colors, or color-matched to specification
Overhead Door Corp.
2501 South State Highway 121,Suite 200
Lewisville, TX 75067
Tel: (800) 275-3290
Fax: (972) 906-1499
E-mail: sales@overheaddoor.com
Web site: http://www.overheaddoor.com
|