RDX® Medium / Standard Duty Commercial Door OperatorThe UL 325 2010 compliant RDX® commercial operator from Overhead Door Corporation is quick and easy to install. Superior safety features come standard. The RDX® line of medium and standard duty commercial DC motor operators is available in three models: Medium (M), Standard (S) and Standard with Hoist (S-H). RDX® is perfect for applications with requirements regarding limited space, quiet operation and quick installation.
Features
Ease of installation
Pre-assembled, self-contained units save considerable installation time and require no additional equipment. The RDX® operator can be installed by one person.
No limit switch
Installers do not have to set open and close limits. RDX® adjusts automatically for less installation time.
DC motor
Lightweight and quiet operation with no thermal overloading
Soft start and stop
Less wear and tear on the door system, less noise, and minimizes cable jumping
Reversing feature
Auto reversing upon obstruction without optional sensing edges.
Built-in timer to close
No need to buy additional accessories. Closes automatically based on set timer and is very useful for special applications, such as unmanned fire stations.
Solenoid lock (optional)
Automatically locks and unlocks door upon operation.
Built-in memory
Slows down door upon third attempt to close after detecting an obstacle. Less wear and tear on the door system.
Compact design
Requires significantly less side room vs. typical commercial operators.
Service reminders
Installer can set up service reminders from controller every 2,500 cycles.
Cycle counter
The number of door operations can be easily counted.
Warranty
All models carry 2 year or 20,000 cycle limited warranty.
Options
RDX® M
- Medium Duty
- Up to 170 sq. ft.
- Maximum door weight 500 lbs.
- 650 Newton motor
- ONLY 9 lbs motor head weight
RDX® S
- Standard Duty
- Up to 350 sq. ft.
- Maximum door weight 900 lbs.
- 1300 Newton motor
- ONLY 12.5 lbs motor head weight
RDX® S-H
- Standard Duty with Hoist
- Up to 350 sq. ft.
- Maximum door weight 900 lbs.
- 1300 Newton motor
- ONLY 24 lbs motor head weight
All models (Medium Duty, Standard Duty and Hoist) are available in single phase and 115VAC/230VAC.
Optional Accessories
Modules
The optional interface module(111257.0001) is designed to allow Overhead Door® standard radio remote control receivers, additional Open/Close/Stop or single button input to operate with RDX® control units.
To maintain compliance when using a sensing edge as a primary safety device with the RDX® commercial operators labeled UL 325 2010, you must use the following module:
Monitored Edge Interface Module – provides an interface between two-wire monitored sensing edges and our X-Series operators. This module allows for the connection of a two-wire monitored sensing edge to be connected to the ODC STB terminals. Compatible for use on Miller Edge electronic two-wire monitored edge models ME, MT and MU.
Receivers
Overhead Door® Receivers: the Horton type (9-Switch Trinary) and the Dual Frequency CodeDodger® Rolling Code Receiver work with one, two, three and four-button transmitters.
Radio Transmitter
Overhead Door® commercial radio transmitter of the same frequency as your selected transmitter receiver.
Sensing Devices
Bottom Sensing Edge - stop and reverses the door upon contact with an obstruction.
Safe-T-Beam® - senses an obstruction and signals the operator to stop or reverse the door.
Commercial Photo Eye Kit® - metal enclosure further protects Safe-T-Beam® photo eyes from damage.
Solenoid Lock
The RDX® commercial operator is designed to offer safe operation without damaging the door while employing a standard slide lock as the main locking system. The auto-lock is an integrated electronic solenoid-operated bolt locking system that provides an extra measure of security for doors that require radio control operation.
Cover
Protects motor from environmental elements.
Cover - cable hoist
Protects motor from environmental elements.
Overhead Door Corp. 2501 South State Highway 121,Suite 200 Lewisville, TX 75067 Tel: (800) 275-3290 Fax: (972) 906-1499 E-mail: sales@overheaddoor.com Web site: http://www.overheaddoor.com
|