CDX® Light Duty Commercial Door Operator
The CDX™ is UL 325 2010 compliant and provides durable and reliable operation. This light duty door operator is designed for use on counter and counter fire door applications. Common applications include factories, schools, concessions, hospitals, cafeterias and retail settings.
Features
Mounting
Front of hood (chain/sprocket coupling to door)
Motor
1/2 horsepower, 115 VAC single phase motor with high start torque, intermittent-duty, NEMA 42 frame open drip-proof construction, instant reversing with automatic reset thermal overload
Drive Reduction
Helical gear primary reduction and hardened bevel gear secondary reduction
Power Train
Oil impregnated bushing to ensure long life
Cycles Per Hour
Operator tested and approved by UL for 5 cycles per hour at rated load of 70 ft-lbs/sec
Limit System
Adjustable linear type; remains synchronized with door during release operation
Display
16-character LCD display provides easy-to-read set-up and diagnostics with backlight for low-light conditions
Cycle Counter
Displays total cycles logged over the operator's lifetime to support warranty and service functions
Independent Timers
Automatic maximum run timer stops the close function if present run time is exceeded, allowing for inspection
Control System
On-board Open, Close and Stop buttons make set-up and testing simple, saving time during installation
Control Buttons
Call Mode/Run Mode, Backlight, Scroll Up/Down, Set/Clear
Warranty
One year limited warranty
Models
Counter Door
Counter Fire Door
Radio Hookups
Option available for fast, simple radio frequency connectivity to enable remote door operation.
Hand Crank
Optional on standard counter door comes with electrical interlock.
Governor
Option available on Counter Fire Door only. Centrifugal drum type governor built into operator to control drop speed without disconnection from door.
Release
Option available on Counter Fire Door only. Spring-loaded for automatic release of door by optional fuse link, Fire SentinelTM or similar fire detection system.
Optional Accessories
Modules
Auxiliary Output Module - this plug-in module will provide several auxiliary sets of dry contacts that are microprocessor controlled. Outputs can be configured using the on-board keypad.
To maintain compliance when using a sensing edge as a primary safety device with our X-Series commercial operators labeled UL 325 2010, you must use one of the following modules:
Timer to Close Module - provides auxiliary control inputs, auxiliary safety inputs, auxiliary timer hold input, and an automatic door closing feature with a user-selectable time-delay. Safety inputs can be enabled or disabled using the on-board keypad. A sensing device must be used with this module.
Monitored Edge Interface Module – provides an interface between two-wire monitored sensing edges and our X-Series operators. This module allows for the connection of a two-wire monitored sensing edge to be connected to the ODC STB terminals. Compatible for use on Miller Edge electronic two-wire monitored edge models ME, MT and MU.
Safety Accessories
Additional safety options include:
Fire Sentinel™ time delay release device
Photoelectric or ionization-type smoke detectors (with or without heat detector)
Solid-state horn, strobe or voice enunciators
Overhead Door Corp.
2501 South State Highway 121,Suite 200
Lewisville, TX 75067
Tel: (800) 275-3290
Fax: (972) 906-1499
E-mail: sales@overheaddoor.com
Web site: http://www.overheaddoor.com
|