Norton Door Controls
3000 Highway 74 East
Monroe, NC 28112
Toll-free: (800) 438-1951
Fax: (800) 338-0965
Website: www.nortondoorcontrols.com
- Multi-point hold open
- Infinite hold open (I suffix) - door will hold open at any degree of opening
up to 175° Maximum Opening 180°.
- Selective hold open (S suffix) - door will hold open at any degree of opening
beyond a pre-set hold open point, up to 175°. Maximum Opening 180°.
Factory set at 80°.
- Pull or push side mounting
- Handed
- Closer size 3, 4 or 5
- Voltage - 24VAC/DC or 120VAC
- 2-year limited warranty
- Radio Frequency - RFI (infinite) or RFS (selective) – RF units are
not UL listed for fire doors
- Free swing arm (7240 pull side only)
- ANSI/BHMA A156.15 certified
- UL listed
- Consists of a hook-up board to receive the power input, an integral smoke
detector module and a door closer assembly with internal electro-hydraulic
holder capability
- Master unit can control a single door or one leaf of a pair of doors
- Slave unit is required on the opposite door leaf
- Identical in size and appearance to a Master unit, the Slave unit consists
of a hook-up board, to receive 24VDC power input from a Master unit, and a
door closer assembly with internal electro-hydraulic holder capability
- Unit is intended to control the inactive leaf of a pair of doors where
the active leaf is controlled by a Master unit
- Shorter in length than the Master and Slave units, the Support unit contains
a hook-up board to receive power input and a door closer assembly with internal
electro-hydraulic holder capability
- Unit is intended to control single doors or both leafs of a pair of doors
where the building’s alarm system monitors the power to the Support
unit
- Unit is identical in size and appearance to a Master unit
- Unit contains a hook-up board to receive the power input, a 433MHz radio
frequency receiver and a door closer assembly with internal electro-hydraulic
holder capability
- Unit is intended to provide remote wireless release of a door that has
been manually placed into the electrified hold open position
- Not intended for use in life safety applications
- Selective single-point hold open
- Spring cushioned dead stop
- Spring size 5; order 7705
- Voltage: 24VAC/DC or 120VAC, 60Hz
- Pull or push side installations
- Fail safe operation
- 2-year limited warranty
- Available with or without smoke detectors
- ANSI/BHMA A156.15 certified
- UL listed (all slave and support units are UL listed for applications with
compatible UL listed fire/smoke detection equipment)
- Unit comprised of integral smoke detector and solenoid hold open mechanism
in the slide track, a hook-up box and door closer
- Can be used to control a single door or a pair of doors in conjunction
with either a Slave or Support unit
- Suffix “PTD” to model number
- Unit is for installation on one leaf or a pair of doors then the other
leaf is controlled by a “PTD” Master unit
- The unit is composed of a solenoid hold open mechanism in the side track,
hook-up box and a door closer
- Unit will only operate on 24VDC power from the Master unit
- Suffix “PTS” to model number
- Unit is comprised of a solenoid hold open mechanism in the slide track,
hookup box and a door closer
- Units can be installed on a single door or a pair of doors when controlled
by compatible UL listed detection equipment such as area ceiling detectors,
pull
stations, and remote alarm panels
- Can also be used in conjunction with a master unit on a pair of doors.
Support unit must be 24VDC
- Suffix “PT” to model number
Norton’s 5700 Series power door operators offer the convenience of “hands-free”
door opening. Today, the convenience of “hands-free” door opening
is more popular than ever. The patented design of LEO® is based on ease
and simplicity. LEO installs in minutes rather than hours and consists of three
basic components: inverter, motor and Norton’s 1601 closer body.
What separates LEO from other operators is its ability to function as a standard
door closer. When the door is opened manually, there is little resistance and
the drive train and motor are not engaged. The 1601 closer, not the motor, controls
the closing cycles.
Based on its dual functionality, ease of use and quiet operation, LEO offers
the customer a unique choice!
- Patent 5,881,497
- Additional patent pending
- Ease of installation and setup
- Application versatility and ease of adjustment
- Push or pull side mounting available
- Operates as mechanical surface closer during close cycles or when door
is opened manually or if power is turned off
- Quiet operation
- Acceptable for fire-rated doors
- Spring force provides the feel of a normal manual door closer
- Door can be opened manually if desired
- Norton® 1600 series door closer
- Adjustable spring power
- Backcheck valve
- Sweep valve & latch valve
- Non-Handed
- Unit Activation Options
- Wall switches
- Motion sensor
- Radio frequency device
- End-User On/Off Switch
- Hold Open options
- 0-30 seconds (5 seconds minimum required for ADA and ANSI/BHMA A156.19)
- Obstruction Detection
- Motor stops if door is obstructed during an opening
- Door closes under manual spring force
• Power Input: 120 VAC, 60Hz
• Current Draw: .6A
• Relay Output: DPDT Normally Open/Normally Closed (jumper)
- C-UL US listed for use on fire and smoke barrier doors
- 1-year warranty (refer to current Norton® price book for terms &
conditions)
- Meets requirements for Americans with Disabilities Act (ADA)
- ANSI/BHMA A156.19 (Low Energy Operators) certified
- Meets requirements
of ANSI/BHMA A156.4 (Door Closers)
The Norton® 6900 PowerMatic® is a low energy power door operator. It
functions using an A/C motor and hydraulic pump to activate a heavy-duty hydraulic
door closer controlled by an Electronic Control Module (ECM) board.
- Application versatility and ease of adjustment
- Handed units
- Push or pull side mounting
- Interfaces with electric hardware and integrates with access control
systems
- Holds Open options
- 0-30 seconds (5 seconds minimum required for ADA and ANSI A156.19)
- Choice of infinite hold open features
- Obstruction Detection
- Door closes if it hits an obstruction while opening
- Door re-opens once if it hits an obstruction while closing
- Norton® 7500 series door closer
- Adjustable spring power
- Backcheck Valve
- Backcheck Position Valve
- Sweep Valve
- Latch Valve
- Speed Control Valve
- Pressure Adjustment Valve
- Power Assist selector switch
- Push and Go selector switch
- Motor startup delay adjustment
- Vestibule Function Delay adjustment (For sequencing two or more units)
- Door Hold Open Delay adjustment
- Single Pole Double Throw (SPDT) Relay Output
- Blow Open Function for Smoke Ventilation
- Presence Detector Input
- 24 VDC @ .5A output
- Selector Mode Switch (3 position)
- OFF – Disables signal except blow open. Unit still powered
- ON – Activates signal inputs for normal use
- HOLD OPEN – Activates the unit to the hold open position indefinitely
- Power Input: 120 VAC, 60 Hz (+10%, -15%)
- Current Draw 1.5A
- Auxiliary Output 24 VDC @ .5A
- SPDT relay output for controlling electric strikes or electric locks not
to exceed 1 amp @ 30 VDC
- C-UL, UL for use on fire and smoke barrier doors
- Meets requirements for UL10C and UBC 7.2 for positive pressure
- 2-year warranty (as per current price list, terms and conditions)
- Meets requirements for Americans with Disabilities Act (ADA)
- ANSI/BHMA A156.19 ( Low Energy Operators) certified
|