Sweets

VSW65 BeyondLiftSlide - Single Track Wood Framed Sliding System

The VSW65 is a Single Track Multi-panel Wood Framed Slider System, designed to provide a large opening glass wall or storefront with any custom panel size; . A panel adjacent to a sliding panel can be a swing panel that can also slide away with the sliding panels on an end panel attached to a side jamb. Swing panels are single acting but can be either inward or outward opening; . Possible configurations and stacking bay options are many; .

Multiple Stacking Possibilities
The sliding wall system can be completely out-of-sight. The tracks can be laid out beyond the frame in a variety of configurations, and the stacking bays can be positioned anywhere along the track. The twocarrier suspension system permits the use of track with right-angle turns and curves, making multiple space set-up configurations and remote storage possible. Swing panels can be attached to the side jambs.

Multiple Space Set-up
Using the same panels with additional parallel and perpendicular tracks will expand or reduce heated or air conditioned spaces with ease and convenience.

Right Turns and Segmented Curved Walls
With an angle astragal profile, systems can accommodate any segmented angle between 0º and 90º between panels allowing the designer to create open corners or bays.

Design Flexibility
Custom sizes of panel heights up to 9’10” (3000 mm) and panel widths up to 5’ (1550 mm) are possible. Individual panels can be designed with different widths, glazing choices (insulated glass, laminated glass, etc.), and a large selection of muntin layouts (horizontal mullions, SDLs, solid panels, higher bottom rails, etc.).

Engineered, Tested System from a Single Source Supplier
NanaWall Systems have been engineered and many systems have been independently tested for air and water penetration resistance, structural deflection, thermal performance and forced entry.

Panels Can Be Taken Out of the Plane of the Opening
The storefront can be completely out of site during business hours. The tracks can be laid out beyond the frame of the opening in a variety of configurations. The stacking bays can be positioned anywhere along the track which makes remote storage possible.

Single Track, Top Hung Systems
When closed, all panels are on a single track, eliminating the need for bulky multi tracks and hence, thick walls.

Virtually Unlimited Number of Panels
The number of panels is restricted only by structural steel constraints. Even if there are structural posts, tracks can be laid to the inside or outside of the posts to allow sliding of the panels beyond the posts.

Swing Entry/Exit Panel
In addition to sliding panels, swing panels can be hinged off of a side jamb.

Design Freedom
All units are made to custom sizes. Glazing choices with insulated glass, laminated glass, etc. A large selection of muntins layouts with mullions, SDL muntins, solid panels, higher bottom rails, etc.

Cross-Grained Solid Wood
Only cross-grained, solid, triple-laminated wood is used.

Choice of Quality Interior Wood and Finishes
Choose from douglas fir, meranti, European pine, and other selected woods. FSC certified wood is available. For interior applications, furniture quality, environmentally-friendly finishes are available. See page 24 of the “General Introduction” Section for details.

Hardware Options
A choice of different locking options are available depending on need. Different handle finishes and custodial hardware are also available. See pages 18 - 21 of the “General Introduction” Section for details.

Weather Resistant
The system is engineered to provide weather resistance, high structural performance, and resistance to dust infiltration.

Outstanding Appearance
European styling and handsome, sleek lines allow glass areas to be maximized. All sliding and locking hardware is integrated into the profiles for a clean, harmonious look. No surface mounted hinges.

Secure
Concealed multiple-point locking operates with a turn of a handle. The bottom shoot bolt between each sliding panel has a full one-inch throw. The top bolts interlock into striker slots in the adjacent panel, and the lower bolts are thrown into striker plates. No surface mounted flush bolts.

Continued Long Term Satisfaction
Quickly open or close panels. Two carrier suspension system allows each single panel to be easily slid. State-of-the-art hardware with sealed ball bearing carriers. Variable interlocking of profiles minimizes expansion problems. Long term ease of operation with compensation and adjustment features. Simple to align sliding panels.

Complete System
Complete, precision built systems with pre-fitted hardware are supplied.

Coordinated Glass Walls
With the WD joining systems, coordinated glass walls can be provided with matching folding doors and windows, matching French doors, transoms, side lites, and corner posts. See the “Matching Windows & Doors” section for more information.

NanaScreen
The NanaScreen™, a series of collapsible pleated screen panels riding a single track is available as an option. The system can be installed within the opening or, with extended tracks, be hidden out of view when not in use. See the “Screens” section for more information.

NanaWall Systems, Inc.
707 Redwood Highway
Mill Valley, CA 94941
Tel: (415) 383-3148
Fax: (415) 383-0312
Tollfree: (888) 411-6262
E-mail: info@nanawall.com
Web site: http://www.nanawall.com