Sweets

VSW35 - Single Track Aluminum Framed Sliding System

The VSW35 Sliding/Stacking System is an individual single panel, aluminum framed, opening glass wall system designed to provide an opening glass wall or storefront with any custom panel size;. An end panel can be a swing panel hinged to a side jamb. Swing panels are single acting but can be either inward or outward opening;. This system features many possible configurations and stacking bay options;.

Swing Entry/Exit Panel
Swing entry/exit panel can be included, if desired, at either or both side jambs. Swing panels can be inward or outward opening (not recommended for heavy commercial use).

Multitude of Stacking Possibilities
Including Pocket Option(s) The panels can be stacked in a number of ways when the unit is opened; see “Stacking Options” for examples. The tracks can be laid out beyond the frame in a variety of configurations.

Floor Track Optional
For certain applications, sills can be eliminated completely – providing seamless transition between two spaces. Locking rods in panels engage in adjustable floor sockets.

Design Flexibility
Custom sizes - heights up to 8’6” and panel widths up to 3”11”. There is a variety of glazing choices (single glass, insulated glass, laminated glass, etc.).

Weather Resistant
This system is engineered to provide weather resistance, good structural performance and resistance to dust infiltration.

Engineered, Tested System from a Single Source Supplier
The NanaWall has been engineered for superior performance. Some units have been independently tested for air and water penetration resistance, structural deflection, thermal performance and forced entry.

Panels Can Be Taken Out of the Plane of the Opening
The storefront can be completely out of site during business hours. The tracks can be laid out beyond the frame of the opening in a variety of configurations. The stacking bays can be positioned anywhere along the track which makes remote storage possible.

Single Track, Top Hung Systems
When closed, all panels are on a single track, eliminating the need for bulky multi tracks and hence, thick walls.

Virtually Unlimited Number of Panels
The number of panels is restricted only by structural steel constraints. Even if there are structural posts, tracks can be laid to the inside or outside of the posts to allow sliding of the panels beyond the posts.

Swing Entry/Exit Panel
All units are made to custom sizes. Glazing choices with insulated glass, laminated glass, etc. A large selection of muntins layouts with mullions, SDL muntins, solid panels, higher bottom rails, etc.

Design Freedom
All units are made to custom sizes. Glazing choices with insulated glass, laminated glass, etc. A large selection of muntins layouts with mullions, SDL muntins, solid panels, higher bottom rails, etc.

Choice of Finishes
A choice of hundreds of high quality anodized and powder coated finishes is available. For thermally broken systems, the option of different finishes on the inside and outside is available; see “Finish Options” in the General Introduction.

Hardware Options
A choice of different locking options are available depending on need. Different handle finishes and custodial hardware are also available; see “Hardware” in the General Introduction for details.

Weather Resistant
The system is engineered to provide weather resistance, high structural performance, and resistance to dust infiltration.

Outstanding Appearance
European styling and handsome, sleek lines allow glass areas to be maximized. All sliding and locking hardware is integrated into the profiles for a clean, harmonious look. No surface mounted hinges.

Secure
Concealed multiple-point locking operates with a turn of a handle. The bottom shoot bolt between each sliding panel has a full one-inch throw. The top bolts interlock into striker slots in the adjacent panel, and the lower bolts are thrown into striker plates. No surface mounted flush bolts.

Continued, Long-Term Satisfactory Operation
Quickly open or close panels. Two carrier suspension system allows each single panel to be easily slid. State-of-the-art hardware with sealed ball bearing carriers. Variable interlocking of profiles minimizes expansion problems. Long term ease of operation with compensation and adjustment features. Simple to align sliding panels.

Complete System
Complete, precision built systems with pre-fitted hardware are supplied.

Coordinated Glass Walls
With the SL joining systems, coordinated glass walls can be provided with matching folding doors and windows, matching French doors, transoms, side lites, and corner posts; see the Matching Windows & Doors section for more information.

NanaScreen

The NanaScreen™, a series of collapsible pleated screen panels riding a single track, is available as an option. The system can be installed within the opening or, with extended tracks, be hidden out of view when not in use. See the Screens section for more information.

NanaWall Systems, Inc.
707 Redwood Highway
Mill Valley, CA 94941
Tel: (415) 383-3148
Fax: (415) 383-0312
Tollfree: (888) 411-6262
E-mail: info@nanawall.com
Web site: http://www.nanawall.com