SL45 - Monumental Standard Aluminum Framed Folding/Paired Panel SystemGeneral Description
The SL45 is a monumental, standard aluminum folding system designed to provide an opening glass wall or storefront up to 43’ wide and a paired panel system for unlimited total width;. The folding system is available in various configurations utilizing one to twelve panels or more with unhinged pairs of panels; . The option exists for swing entry/exit panel(s), but note panel size constraints with a swing panel not hinged to a side jamb. There are many design possibilities; units can be either: all inward-opening or all outward-opening; some panels inward-opening and some panels outward-opening; panels can be center-pivoted;.
Special Features of Nanawall SL45 System
Stacking Configurations for Special Applications
Options exist for a variety of configurations: all inwardopening panels, all outward-opening panels, some panels opening in and some panels opening out, or center-pivoted panels. Unhinged paired panel options give maximum stacking flexibility. In addition, angled units of 90° and 135° or segmented units allow designers to create large bay or "curved" openings.
Monumental Sized Systems
Monumental sized panels are possible, with frame heights up to 9'6" and panel widths up to 3'7". Heavier and/or thicker glass (such as bullet-resistant laminated glazing) can be used (limited in sizes).
Florida Approval
The SL45 straight system with panel size of up to 36" x 98" is Florida statewide approved with Product Approval number FL 8612. This information can be viewed at http://www.floridabuilding.org
Common Features of Nanawall Aluminum Folding System
Large Exterior Openings Are Possible
With NanaWall® folding systems, openings can range from as few as two panels to as many as twelve panels and can be as wide as 43'. With paired panels, virtually unlimited widths are possible.
Engineered, Tested System from a Single Source Supplier
NanaWalls have been engineered and independently tested for air and water penetration resistance, structural deflection, thermal performance and forced entry. The SL60, SL70 and SL73 are NFRC certified and labeled, and have also been tested for acoustic performance. The SL73 is Miami-Dade County/AAMA hurricane approved and state wide Florida approved. All aluminum systems (except SL35) are state wide Florida approved.
Secure
Multiple point locking that operates with a turn of a handle. The top and bottom shoots bolts between each folding pair of panels have a full one inch throw. Independent tests confirm that the locking system passes strict California forced entry testing requirements. No surface mounted flush bolts for standard units.
Versatile Functions
Versatile functions with swing entry/exit panel(s) option and with flexibility to fully or partially open. Ease of operation to quickly open or close wide openings.
Multitude of Stacking Configurations
Over fifty stacking configurations as well as inward opening, outward opening, or center pivoted options. Unhinged paired panels option for maximum stacking flexibility and larger opening walls. 90°, 135°, segmented or other angled units.
Outstanding Appearance
European styling and handsome, sleek lines allow glass areas to be maximized. All folding and locking hardware is integrated into the profiles for a clean look and for narrow stacking. No surface mounted hinges.
Continued, Long-Term Satisfactory Operation
Smooth sliding and folding operation, even when the bottom track has some dirt and sand in it. State-of-the-art hardware with ball bearing running carriages. On top hung systems, the main weight is carried by the head track. On floor mounted systems, the lower running carriage rides on top of the sill track. Variable interlocking of profiles minimizes expansion problems. Long term ease of operation with adjustment features.
Easy to Install, Complete System
Easy to install with complete, precision built systems and pre-fitted hardware.
Design Flexibility
Design freedom with custom sizes, thermally broken and non-thermal options, glazing choices, and monumental series for larger panels or heavier glass panes. Top hung or floor supported. Raised sill or flush sill options. A large selection of muntin layouts is offered. Horizontal mullions, SDL muntins with spacer bars, solid panels, or other custom layouts are available.
Choice of Finishes
A choice of hundreds of high quality anodized and powder coated finishes is available. For thermally broken systems, the option of different finishes on the inside and outside is available; see "Finish Options" in the General Introduction.
Hardware Options
A choice of different locking options are available depending on need. Different handle finishes are also available see "Hardware" in the General Introduction. Depending on the configuration selected, door closers can be incorporated and units can be prepared for panic devices provided by others. Custodial hardware is also available.
Complete, Coordinated Glass Walls
With the SL joining system, complete, coordinated glass walls can be provided with various folding doors and folding windows combinations, individual sliding panel system (HSW or VSW), matching French doors, transoms, side lites, and corner posts; see the Matching Windows & Doors, HSW50 NanaWall® and the VSW35 NanaWall® sections.
NanaScreenTM
The NanaScreenTM, a series of collapsible pleated screen panels riding a single track, is available as an option. The system can be installed within the opening or, with extended tracks, be hidden out of view when not in use; see the Screens section for more information.
NanaWall Systems, Inc.
707 Redwood Highway
Mill Valley, CA 94941
Tel: (415) 383-3148
Fax: (415) 383-0312
Tollfree: (888) 411-6262
E-mail: info@nanawall.com
Web site: http://www.nanawall.com
|