03 54 00/MAX BuyLine 5015
Maxxon® Corporation
920 Hamel Road, PO Box 253
Hamel, MN 55340
Phone: 1-(800) 356-7887 or (763) 478-9600
Fax: (763) 478-2431
E-mail: info@maxxon.com
Web site: www.maxxon.com
Engineered to deliver compressive strengths
up to 3200 psi (22.1 MPa), new Gyp-Crete 2000/3.2K
also delivers enhanced resistance to surface abrasions and even faster
drying time. It’s ideal for use over wood or concrete subfloors in single-family,
light commercial and multifamily construction, as well as renovation projects.
And it’s crack-resistant surface provides a perfect base for practically
any floor covering.
Compressive Strength: |
Up to 3,200 psi (14 to 22 MPa) |
VOC Content: |
<0.24 mg/m 3 |
‘K’ factor: |
5.15 Btu/(h • ft² • ºF) (.7416 W/[m • ºC]) |
Specific Heat: |
.222 Btu/(lb • ºF) at 85ºF (.9301 kJ[kg • ºC] at 29.44ºC) |
Weight: |
At 3/4", less than 7.2 lbs./sq.ft. (At 19 mm, less than 35.2 kg/m²) |
Dry Density: |
115 lbs./ft.³ (1840 kg/m³) |
Point Loading: |
Typical loading of up to 2,500 lbs. on a 1" (1,135 kg on a 25.4 mm) diameter disc |
Surface Burning Characteristics: |
Flame spread: 0
Fuel contributed: 0
Smoke density: 0 |
|
|
Single Family Housing
Wood Frame Commercial
USGBC LEED Credit Areas Impacted
by Gyp-Crete 2000/3.2K Green Floor Underlayment
|
Project |
Category |
Credit |
Indoor Environmental Quality |
Low Emitting Materials |
EQ 4 |
VOC content <0.24 mg/m3 |
Materials &
Resources
|
Recycled Content
Local/Regional Materials
|
MR 4
MR 5
|
Pre-consumer recycled content
Fly Ash
Blue Rapids, KS 66411
Las Vegas, NV 89036
Camden, NJ 08103
Brunswick, GA 31520
Job site manufactured with local sand & water
|
Customized CSI formatted specification
are available upon request, or on our website at www.maxxon.com.
|