03 54 00/LEV BuyLine 8146
Maxxon® Corporation
920 Hamel Road, PO Box 253
Hamel, MN 55340
Phone: 1-(800) 356-7887 or (763) 478-9600
Fax: (763) 478-2431
E-mail: info@level-right.com
Web site: www.level-right.com
Levels, Smoothes, Repairs 0-10 mm (0 -
3/8"), FAST!
When the job calls for a new floor that's
smooth, level and super fast-setting, Level-Right®
FS-10 comes to the rescue. Ideal for thin-topping applications over concrete,
it provides a smooth, level new surface that dries fast to keep your job
on schedule, and to allow for placement of floor goods soon after application.
- New construction or renovation
- Levels entire floors or transition areas,
featheredge to deepfill
- Resurfaces old or damaged concrete floors
- Up to 7200 PSI (50 MPa), hydraulic cement
- Water resistant
- Caps cracked, lightweight concrete
- Above, on or below grade
- Fills "duck ponds" in concrete floors
- No troweling required
- Provides a temporary wear surface in as
little as two to four hours after application
- Experienced, authorized applicators worldwide
- Exceeds standards set by leading floor goods
manufacturers
- Easy mixing - just add water
- Can be barrel-mixed or used in any continuous
pumping machine
- Supported by Maxxon® Corporation
Compressive
Strength:
Modified ASTM C 109 |
| Typical: |
1,500 PSI (10.3 MPa) 1 day |
|
5,270 PSI (36.2 MPa) 7 days |
|
5500-7200 PSI (38-50 MPa)
28 days |
|
Freeze/Thaw
Resistance:
ASTM C 666 |
90% +/-3% |
| Dry Density: |
Approx. 120 - 125 lbs/ft³
(1922-2003 kg/m²) |
Tensile Strength:
ASTM C 190 |
1,200 PSI (8.3
MPa) (28 days) |
| Abrasion: |
ASTM Taber 250
Cycles,
1,000 gram load on H 22, 4" wheels:
wt. loss 0.30 gram |
Shear Bond Strength
with Concrete:
ASTM C 882-91 |
1060 PSI (7.3 MPa)
56 days |
Shear Bond Strength
with
Level-Right FS-10:
ASTM C 882-91 |
3160 PSI (21.7
MPa) 56 days |
. Customized CSI formatted specifications
are available upon request, or on our website at www.maxxon.com.
|