MAPEI Corporation
1144 East Newport Center Drive
Deerfield Beach, FL 33442
Toll-Free: (800) 42-MAPEI
Fax: (954) 246-8800
E-mail: dmiller@mapei.com
Web site: http://www.mapei.com

Waterproofing

Mapelastic™
Cement-Based Waterproofing & Crack Isolation System
The next generation in liquid applied membranes. It is a trowelable, sprayable and highly flexible fiber-modified Portland cement-based membrane. Mapelastic has excellent compatibility with cement-based bonding materials. In addition, it has outstanding performance in aquatic centers, spas, steam showers, balconies and building facades that are subject to freeze/thaw, immersion and temperature expansion. Can accommodate minor substrate movement and can also be used as a crack isolation membrane. For both commercial and residential use. Mapelastic is IAPMO-approved for use as a shower pan liner.

Mapeband™ Waterproofing Accessories for Use with Mapelastic
Drain fittings, covings, inside corners and outside corners to ensure waterproofing integrity and membrane “termination points”.
Planiseal™ 88
Cement-Based Waterproof Coating
Planiseal 88 is a one-component, pre-blended, cementitious waterproof coating intended for the protection of concrete and masonry surfaces. Planiseal 88 can be used as a waterproofing and protection coating/mortar on interior and exterior concrete and masonry surfaces such as basements, galleries, foundation walls, reservoirs, swimming pools, irrigation canals, wet rooms, retaining walls, bridges, overpasses, piers, beams, facades, ceilings and balconies. When mixed with water, Planiseal 88 withstands negative and positive hydrostatic pressures and is applied to either negative or positive side concrete surfaces to provide waterproofing. Planiseal 88 can be applied by trowel or brush (spray applications are recommended for larger jobs) up to 1/16" (1,5 mm) thick. To obtain a coating/mortar having superior adhesion, cohesion and waterproofing characteristics, mix with Planicrete® AC.

Planiseal™ Plug
Quick Setting Mortar for Stopping Leaks and Concrete Repair
Planiseal Plug is a quick-setting mortar specially designed to stop leaks and to repair concrete. Planiseal Plug is used for repairing horizontal and vertical surfaces, in interior or exterior concrete applications, such as: repairing substrates, floors, walls, sidewalks, pipes, pre-cast concrete components; anchoring door and window frames and any other component requiring to be mechanically fastened to concrete substrates; quick patching of any type of conduits in concrete substrates (sewers, wastewater treatment plants, etc.); and patching and sealing small water leaks in concrete structures very quickly. When mixed with water, Planiseal Plug ensures high compression and flexural strengths in just 3 hours. Planiseal Plug is chloride-free and is intended for vertical and horizontal surfaces. When hardened, Planiseal Plug is highly resistant to water and freeze/thaw cycles.