MAPEI Corporation
1144 East Newport Center Drive
Deerfield Beach, FL 33442
Toll-Free: (800) 42-MAPEI
Fax: (954) 246-8800
E-mail: dmiller@mapei.com
Web site: http://www.mapei.com

Two-Component Concrete Repair Mortar Systems

Planitop® 10 Plus System
Fast-Setting Cement Patching and Leveling System
The Planitop 10 Plus System consists of Planitop 10 fast-setting cement patching mortar mixed with Planitop 10 Plus acrylic latex additive for superior cohesive strength and extended pot life. This system is ideal for leveling resilient embossed surfaces having a vinyl or urethane wear layer. Planitop 10 Plus mixed full strength with Planitop 10 may also be used to skim coat existing cutback adhesive prior to the direct glue down installation of floor coverings. Use the Planitop 10 Plus System for thin applications over very porous concrete and dry, wooden substrates to compensate for the poor hydration of patching compounds in these situations. The Planitop 10 Plus System can be used in applications up to 1/4" (6 mm) thick.

Planitop® 21
Two-Component, Cement Patching System
Planitop 21 is a pre-blended two-component polymer-modified cementitious mortar. Planitop 21 is used for the renovation and resurfacing of concrete structures such as galleries, tunnels, bridges, overpasses, retaining walls, beams, building facades, ceilings, etc. Planitop 21 is also used for the treatment of concrete surface blemishes and defects, filling of honeycombs, voids and cavities and to protect concrete against pollutants and acid rain. Planitop 21 contains a high concentration of synthetic polymer, which has excellent adhesion, flexural strength, compressive strength, water impermeability, and freeze/thaw resistance. Apply up to 1/4" (6 mm) thick.

Planitop® 23
Two-Component, Fiber Mortar System for Concrete Repairs
Planitop 23 is a pre-blended, two-component, fast-setting, polymer-modified thixotropic cementitious fiber mortar. Planitop 23 is used for the renovation and resurfacing of concrete structures such as galleries, tunnels, bridges, overpasses, retaining walls, beams, building facades, ceilings, etc. Planitop 23 is also used for the treatment of concrete surface blemishes and defects, filling of honeycombs, voids and cavities and to protect concrete against pollutants and acid rain. Planitop 23 contains a high concentration of synthetic polymer and fiber, which produces a repair mortar having excellent adhesion, flexural strength, compressive strength, water impermeability, and freeze/thaw resistance. Once mixed, the two components produce a mortar easy to apply on vertical, horizontal and overhead ceilings surfaces, in thicknesses of 1/8" (3 mm) minimum to 1-5/8" (40 mm) maximum per coat.

Planitop® 25
Two-Component, Fluid Mortar System for Concrete Repairs
Planitop 25 is a pre-blended, two-component, polymer-modified cementitious fluid mortar. Planitop 25 is used for the renovation and resurfacing of concrete structures such as galleries, tunnels, bridges, overpasses, retaining walls, beams, building facades, ceilings, etc. Planitop 25 is also used for the treatment of concrete surface blemishes and defects, filling of honeycombs, voids and cavities and to protect concrete against pollutants and acid rain. Once mixed, the two components produce a mortar easy to apply on horizontal surfaces in thicknesses of 1/2" – 1" (12 – 25 mm) per coat. Planitop 25 contains a high concentration of synthetic polymer, which produces a repair and surfacing mortar that has excellent adhesion, flexural and compression strengths, water resistance and freeze/thaw resistance. Planitop 25 is flowable and pourable on slabs, allowing it to fill hard to reach spaces.

Mapecem® 100  + Planicrete® PM
Fast-Setting, Premixed Topping Mortar System
A pre-blended, fast-setting, cement-based mortar system that requires no curing (use protection in adverse climatic conditions [heat, wind, etc.]). Mapecem 100, with the addition of Planicrete PM, can be pumped and used for the treatment of concrete defects, filling honeycombs, voids and cavities and for construction or repairs of new and existing concrete slabs. Mapecem 100 + Planicrete PM can also be used when floating or monolithic toppings are required. When properly used, Mapecem 100 has residual moisture content less than 2.5% within 24 hours. Mapecem 100 + Planicrete PM can be opened to traffic within 3 – 4 hours.