MAPEI Corporation
1144 East Newport Center Drive
Deerfield Beach, FL 33442
Toll-Free: (800) 42-MAPEI
Fax: (954) 246-8800
E-mail: dmiller@mapei.com
Web site: http://www.mapei.com

One-Component Concrete Repair Mortars

MAPEI Fine/Finish®
Fast-Setting, Cement-Based Skim Coating Compound
For finishing and smoothing fully cured concrete, approved wood underlayments, properly prepared ceramic tile and cutback adhesive residue prior to the installation of a floor covering.

Planitop® 10
Fast-Setting Cement Patching Compound
Planitop 10 is a fast-setting interior repair mortar used for patching and conditioning horizontal surfaces before the application of flooring. Use Planitop 10 to smooth concrete, wood or other approved surfaces up to thickness of 1/2" (12 mm).

Planitop® 12
Fiber Mortar for Concrete Repairs
Planitop 12 is a one-component, shrinkage-modified, cementitious, thixotropic, fiber mortar intended for the renovation of vertical, overhead and horizontal concrete surfaces. Use Planitop 12 for overhead structural concrete repairs and restoration up to thickness of 4" (101 mm). Planitop 12 can be placed in large quantities in overhead applications and is perfect for pre-cast, cast-in-place, post-tensioned or pre-stressed concrete repair.

Planitop® 15
Fluid Fiber Mortar for Concrete Repairs
Planitop 15 is a one-component, non-shrink, cementitious, very fluid fiber mortar. Planitop 15 is perfect for form and pour applications where high early strength and flowability are required. Planitop 15 is used as a concrete repair and restoration material that can be fluid applied into a form from thicknesses of 3/8" – 4" (10 – 101 mm).

Planitop® 16
Chemical and Abrasion-Resistant Mortar for Concrete Repairs
Planitop 16 is a magnesium phosphate concrete with superior chemical resistance, abrasion resistance and freeze/thaw resistance. Planitop 16 is perfect for all DOT horizontal concrete repairs (bridge decks, roadways, ramps, etc.) and is recommended in high impact applications such as loading docks, warehouse and manufacturing floors.  Planitop 16 has setting characteristics that are ideal for freezer repair and will set and harden in extreme cold.  Planitop 16 can also be used for repair of control/expansion joint nosings, to repair holes and cavities in most types of concrete and masonry surfaces, and for anchoring iron or steel bridge and balcony railings. Planitop 16 can be used in thicknesses of 3/8" – 3" (9 – 75 mm).

Planitop® 18
Fast-Setting, High-Strength Mortar for Concrete Repairs
Planitop 18 is a one-component, shrink age-modified, fast-setting, cementitious repair mortar that is ideal for all horizontal concrete repairs including bridge deck overlays, parking garage floor repairs and various horizontal DOT concrete repairs.