Sweets

Lyon^® Personal Effects Lockers establish secure storage space for employees or patrons without using up a lot of floor space. Designed to hold jackets, folded garments, handbags and other personal belongings. Select from four models offering storage for four to ten people in a single unit. Ideal for employees at convenience and department stores, restaurants, medical centers, recreation centers, theaters and many other locations. Available from stock in Dove Gray or Putty (a light beige). Choose padlock attachments or optional combination locks. Number plates also available. Shipped set-up, ready to use.

A. FOUR PERSON LOCKERS feature wider compartments that are ideal for bulky garment. Perforated doors provide ventilation. Size overall: 26" wide x 21" deep x 84" high.

B. EIGHT PERSON APPAREL LOCKERS allow hanging of garments on coat rod, and storing other articles in large 6" x 38" vertical compartments. Size overall: 32-9/16" wide x 21" deep x 84" high.

C. NINE PERSON PRIVACY LOCKERS features oversize 18" x 8" compartments that hold books, purses, lunches, folded garments and more. Size overall: 24" wide x 15" deep x 84" high.

D. TEN PERSON PRIVACY LOCKERS take up less than 1-1/2 square feet of floor space, yet offer 12" x 6" compartments for purses, books, lunches and small parcels. Size overall: 18" wide x 15" deep x 78" high.

Body – 24 gauge steel, flanged to form double thickness of metal at rear vertical corners. Bottoms to be made of galvanized steel and painted for additional corrosion resistance. Only bottom of locker to come into contact with floor.

Door Frame Assembly – 18 gauge formed-steel channels. Vertical members have an additional flange to form continuous door strike. Corners are lapped and welded into a rigid assembly. In addition, bottom cross members have tangs at each end that engage the vertical members to prevent twisting out of alignment. Top and bottom cross members provide support for front edge of locker top and bottom.

Hinges – 2" high, .050" steel, five knuckle, full-loop forming double thickness on each leaf. Hinge pin is spun over at ends to prevent removal. Hinges are set in slots in right-hand frame members and projection-welded.

Doors – 20 gauge steel formed at approximately 90° angle on all four sides. Eight compartment doors attached with two stalock fasteners. Nine and 10 compartment doors attached with two rivets. Eight compartment units have three louvers near top and bottom of each door. Nine and 10 compartment units have one louver at center of each door.

Anchoring – To prevent tipping or injury, Lyon strongly recommends that lockers be floor and/or wall anchored.