|
|
|
|
MasterFormat
|
|
help
|
|
|
*
|
|
|
|
|
|
|
|
 |
|
|
|
|
|
|
|
LATICRETE INTERNATIONAL, INC.
1 LATICRETE Park North
Bethany, CT 06524-3423 USA
Telephone: +1.203.393.0010, ext. 235
Toll Free: 1.800.243.4788, ext. 235
Fax: +1.203.393.1948
E-mail: technicalservices@laticrete.com
Web site: http://www.laticrete.com
LATICRETE SpectraLOCK PRO Grout is a patented, high performance epoxy grout that offers color uniformity, durability and stain resistance with extraordinary ease of use.
Uses
- Ceramic tile, glass tile and stone applications, residential and commercial
- Interior and exterior
- Floors and walls
- Ideal for re-grouting applications
- Swimming pools, fountains and other wet area applications
Advantages
- Meets performance requirements of ANSI A118.3–1999
- 80 minutes working time at 70°F (21°C)
- Inhibits the growth of stain-causing mold and mildew in the grout joints with Microban® antimicrobial product protection
- Ideal for installations at wide temperature ranges
- Uniform color—no blotchiness or shading
- Easy to maintain, cleanable to the original color
- Stain resistant
- Tough, durable, and crack resistant
- Outperforms cement based grout
- Non-sag formula for walls and floors
- High fashion with Dazzle component
Packaging
| Unit Size |
Yield |
Parts A & B |
Part C Color Powder
|
| Mini |
0.2 US gal (0.7 l) |
A: 0.32 lb (0.14 kg)
B: 0.32 lb (0.14 kg)
|
C: 2.25 lb (1.0 kg)
|
| Full |
0.8 US gal (3.0 l) |
A: 1.28 lb (0.6 kg)
B: 1.28 lb (0.6 kg)
|
C: 9.0 lb (4.0 kg)
|
| Commercial |
3.2 US gal (12.0 l) |
A: 4 × 1.28 lb (0.6 kg)
B: 4 × 1.28 lb (0.6 kg)
|
C: 4 × 9.0 lb (4.0 kg) |
Approximate Coverage
Refer to Coverage Chart located on Data Sheet 254.3 HC.
Actual coverage will vary depending on job site conditions, actual tile size and installed grout joint size. Add 10% for waste, spillage and clean-up, and another 10%–15% when grouting unglazed quarry tile. Expanded coverage tables at www.laticrete.com/coverage.
Shelf Life
Factory sealed containers of this product are guaranteed to be of first quality for the time listed below if stored at temperatures greater than 32°F (0°C) and less than 95°F (35°C).
Part A & B Liquids – two (2) years
Part C Powder – no limit*
* High humidity will reduce the shelf life of bagged product.
Limitations
- Not for use in areas subjected to harsh chemicals, or areas exposed to aggressive cleaning regimens (e.g. steam cleaning). Not for use on floor and base areas in veterinary clinics, kennels, or in applications exposed to high concentrations of food and mineral acids or areas exposed to high temperatures. For these areas LATICRETE recommends using grout that meets ANSI A118.5 such as LATAPOXY® 2000 Industrial Grout
- Epoxy grout for ceramic tile and stone is not a replacement for a waterproofing membrane. When a waterproofing membrane is required, use a LATICRETE Waterproofing Membrane (see Section 10 FILING SYSTEMS)
- LATICRETE SpectraLOCK PRO Grout should not be used on floors and base in the food preparation or cleaning area of commercial and industrial kitchen applications
Cautions
- DO NOT add water or any other material to the mixture, or re-temper with water. This will have an adverse effect on the product and void all warranties
- Protect finished work from traffic until fully cured
- LATICRETE SpectraLOCK PRO Grout liquid components might irritate eyes and skin. Avoid contact with eyes and/or prolonged contact with skin
- Wear protective gear (gloves, long sleeve shirt, and safety glasses) when applying. Flush thoroughly with water in case of initial contact
- DO NOT ingest internally. Silica sand may cause cancer or serious lung problems. Avoid breathing dust. Wear a respirator or dust mask. See MSDS for more information
- Keep out of reach of children
- Protect from freezing
- Light colors may darken and dark colors may fade slightly from direct UV exposure in exterior applications. Consult with LATICRETE Technical Services for specific exterior recommendations
- LATICRETE® SpectraLOCK® Dazzle (Glow) not for use in submerged installations
- Maximum stain resistance is achieved in seven days at 70°F (21°C). Protect from exposure to acids (such as mustard, salad dressing, etc.) and strong cleaners during this period. Protect grout from dirt, construction debris, and contamination for 7 days @ 70°F (21°C)
- LATICRETE SpectraLOCK PRO Grout is a sanded grout. Use of sanded grouts in joints <1/8" (3 mm) will result in a coarser surface compared to surfaces in wider joints
- LATICRETE SpectraLOCK Dazzle (Glow) might discolor from strong alkali cleaners and acids. Use a neutral pH solution of soap and water when cleaning LATICRETE SpectraLOCK PRO Grout mixed with LATICRETE SpectraLOCK Dazzle (Glow)
- Some soft polished marble or delicate glazed or glass tile might be scratched by LATICRETE SpectraLOCK PRO Grout during installation. Apply a small test area to determine results before grouting entire installation
- In steam rooms or submerged applications, allow LATICRETE SpectraLOCK PRO Grout to cure for 10 days at 70°F (21°C) days before use of area and filing with water. See TDS 192 for more information on these applications
- LATICRETE SpectraLOCK PRO Grout is resistant to staining when exposed to most household products and cleaners (e.g. ketchup). However, long term exposure to any material without proper cleaning and maintenance will increase the probability of stains
- Epoxy Resins may affect the color of white or porous stones (such as White Carrara, Thasos White, Royal Danby etc.)
- Test stones for compatability with water and cleaning additive mixture
- Conduct a test area to determine compatibility with metal or steel tile
† United States Invention Patent No.: 6881768 (and other Patents)
VOC/LEED Product Information
This product has been GREENGUARD Indoor Air Quality Certified® by the GREENGUARD Environmental Institute under the GREENGUARD Standard for Low Emitting Products in finished form.
Total VOC Content pounds/gallon (grams/liter) of product in unused form is 0.00026 lb/gal (0.031 g/l).
Applicable Standard
ANSI A118.3 tested with 1244 Bright White
Physical Properties
| Test/Test Method |
Description |
Results
|
ANSI A118.3 E5.1
|
Water Cleanability |
Water Cleanable at 80 minutes |
| ANSI A118.3 E5.2 |
Initial Set Service Strength |
> 2 hours < 24 hours
|
| ANSI A118.3 E5.3 |
Shrinkage
|
< 0.25% |
| ANSI A118.3 E5.4 |
Vertical Joint Sag |
Pass
|
| ANSI A118.3 E5.5 |
Quarry/Quarry Bond Strength |
1,000 psi (tile failure) 6.9 MPa |
| ANSI A118.3 E5.6 |
Compressive Strength |
3,500 psi (7 days) 24 MPa
|
| ANSI A118.3 E5.7 |
Tensile Strength |
1,100 psi (7 days) 7.6 MPa
|
| ANSI A118.3 E5.8 |
Thermal Shock |
510 psi 3.5 MPa
|
| ANSI A118.3 |
Water Absorption |
< 0.50% |
Chemical Resistance* Chart
| Chemical Name |
Splash Exposure
(30 min) |
Intermittent
Exposure
(24 hours) |
Continuous
Exposure
(7 days) |
| 20% Sulfuric Acid |
R |
R* |
NR* |
| 5% Lactic Acid (Milk) |
R |
R |
R |
| 50% Tannic Acid |
R |
R |
R |
| 50% Tartaric Acid |
R |
R |
R |
| 10% Oxalic Acid |
R |
R |
R |
5% Acetic Acid
(Vinegar) |
R |
R |
R |
| 5% Benzoic Acid |
R |
R |
R |
| 3% Formic Acid |
R |
R |
NR |
5% Citric Acid
(Gatorade Drink) |
R |
R |
R |
10% Potassium
Permanganate |
R* |
R* |
R* |
1% Potassium
Permanganate |
R* |
R* |
R* |
5% Sodium
Hypochlorite (Bleach) |
R |
R |
NR |
| 45% KOH (Cascade) |
R |
R |
R |
| Distilled Water |
R |
R |
R |
Chemical Resistance* Chart
| Chemical Name |
Splash Exposure
(30 min.)
|
Intermittent Exposure
(24 hours)
|
Continuous
Exposure
(7 days)
|
Mineral Water
|
R |
R |
R |
Sea Water
|
R |
R |
R |
Methanol
|
R |
NR |
NR |
10% Ethanol
(wine, beer) |
R |
R |
R |
| 96% Ethanol (Spirit) |
R |
R |
NR |
| Isopropanol (Windex) |
R |
R |
R |
| Mek |
R |
NR |
NR |
| Chloroform |
NR |
NR |
NR |
Methylene Chloride
|
NR |
NR |
NR |
Toluene
|
R |
R |
NR |
| Xylene |
R |
R |
R |
* Material will stain due to exposure to these items.
R=Recommended NR=Not Recommended. Chemical Resistance determined in accordance with ASTM C267-1982.
NOTES TO SPECIFIER: Use the constant exposure recommendations for intermittent exposure to reagents at temperatures above 90°F (32°C).
Working Properties
Density—15 lbs/gal (1.8 g/ml)
| Test Standard |
Temperature |
| |
|
40°F (4°C) |
70° (21°C) |
95°F (35°C) |
| ANSI A118.3 Eâ“5.1 |
Working Time |
120 min. |
80 min. |
30 min.
|
| LIL-AS-01-110904 |
Tack Free Time |
12 hrs. |
4 hrs. |
2 hrs. |
| LIL-AS-01-110904 |
Ready for Light Foot Traffic |
24 hrs. |
12 hrs. |
6 hrs. |
| LIL-AS-01-110904 |
Ready for Heavy Foot Traffic |
48 hrs. |
24 hrs. |
12 hrs. |
| LIL-AS-02-110904 |
Dirt, Stain Resistance, Food
Spills, Household Cleaners |
14 days |
7 days |
3 days |
| LIL-AS-03-110904 |
Full Cure |
28 days |
14 days |
7 days |
Specifications subject to change without notification. Results shown are typical but reflect test procedures used. Actual field performance will depend on installation methods and site conditions.
See Data Sheet 685.5, How To Install LATICRETE® SpectraLOCK®† PRO Grout, for detailed installation instructions. This document is available online at www.laticrete.com and is included in all Part AB units.
† United States Invention Patent No.: 6881768 (and other Patents)
Availability
LATICRETE and LATAPOXY® materials are available worldwide.
For Distributor information, call:
Toll Free: 1.800.243.4788
Telephone: +1.203.393.0010
For on-line Distributor information, visit LATICRETE at www.laticrete.com.
Cost
Contact a LATICRETE Distributor in your area.
See 10. FILING SYSTEM
DS 230.13: LATICRETE Product Warranty
A component of:
DS 025.0: LATICRETE 25 Year System Warranty
DS 230.99: LATICRETE Lifetime System Warranty
LATICRETE and LATAPOXY grouts require routine cleaning with a neutral pH soap and water. Contact the cleaner manufacturer if another cleaner type will be used to ensure compatibility with the grout. All other LATICRETE and LATAPOXY materials require no maintenance but installation performance and durability may depend on properly maintaining products supplied by other manufacturers. For additional information, please refer to the LATICRETE Grout Selection and Maintenance Guide, TDS #400.
Technical assistance
Information is available by calling the LATICRETE Technical Service
Hotline (hours 8:00 AM to 5:30 PM EST):
Toll Free: 1.800.243.4788, ext. 235
Telephone: +1.203.393.0010, ext. 235
Fax: +1.203.393.1948
Technical and safety literature
To acquire technical and safety literature, please visit our website at www.laticrete.com.
Additional product information is available on our website at www.laticrete.com. The following is a list of related documents:
DS 230.13: LATICRETE Product Warranty
DS 025.0: LATICRETE 25 Year System Warranty
DS 230.99: LATICRETE Lifetime System Warranty
DS 634.0: LATAPOXY 2000 Industrial Grout
DS 236.0: LATICRETE 9235 Waterproofing Membrane
DS 685.5: How To Install LATICRETE SpectraLOCK PRO Grout
TDS 400: LATICRETE Grout Guide
TDS 192: Installation of Ceramic Tile In Swimming Pools.
DS 663.0: LATICRETE Hydro Ban™
LATICRETE International, Inc.
One LATICRETE Park North, Bethany, CT 06524-3423 USA • 1.800.243.4788 • +1.203.393.0010 • www.laticrete.com
©2010 LATICRETE International, Inc.
LATICRETE, LATAPOXY, SPECTRALOCK and the logo are Registered Trademarks of LATICRETE International, Inc.
GREENGUARD Indoor Air Quality is a registered trademark of the GREENGUARD Environmental Institute.
Microban is a registered trademark of Microban Products Company.
Data Sheets are subject to change without notice. For latest revision, check our website at www.laticrete.com
|
|
|
|
|
|
|
|