Secured to concrete, metal deck, or structural framing, Model IsoGrid Quick-Connect Ceiling Hanger incorporates a neoprene element to resiliently support one or more layers of gypsum board. Attachment can be made directly into concrete by powder-actuated fastener through the hanger (where loads and local code permits). A lag screw can be used to screw into wood joists. Wire can then be tied to the bottom of the hanger bracket through the built-in mounting holes. Gypsum board is then installed using either drywall ceiling grid or cold rolled and hat channel.
- Dramatic labor savings over conventional ceiling hangers
- Meet code requirements while maximizing ceiling height
- Various attachment methods allow for installation on a variety of ceiling structures
- Easiest and quickest install of any ceiling hanger
- Known deflection rates ensure performance under design loads
- A built-in limit stop incorporated into the design ensures low cost and trouble free installation without acoustical short-circuit
Kinetics Noise Control Model IsoGrid utilizes our specially designed Dual Deflection neoprene isolator with internal bulge areas. These internal bulge areas allow the Dual Deflection neoprene element to achieve greater deflections than similarly sized elements while maintaining lateral stability. Greater deflection translates to greater performance for your noise control ceilings.
| Model |
Maximum Capacity (lbs.) |
Maximum Deflection (in.) |
Layers of Drywall* |
Dot Color |
| 40 |
41 |
0.20 |
1 |
White |
| 105 |
106 |
0.20 |
2 |
Green |
| 160 |
158 |
0.20 |
3 |
Red |
*Based on IsoGrid 4'x4' spacing
Kinetics Noise Control, Inc.
6300 Irelan Place
P.O. Box 655
Dublin, OH 43017
Tel: (614) 889-0480
Toll-Free: (800) 959-1164
Fax: (614) 889-0540
Email: sales@kineticsnoise.com
Website: http://www.kineticsnoise.com
|