08520 Aluminum Windows

Projected Windows

• Improved thermal performance developed specifically for climates subject to temperature extremes
• Unique corner joinery provides consistent "picture frame" sightlines
• Two-color finish option available
• Ideal for health care, condominiums — anywhere comfort is paramount

• Available as projected, casement, top hinged and fixed
• Tested for Heavy Commercial and Architectural Window Performance Class and Grade
• 2-1/4" frame depth
• Optional dual glazing with or without Venetian blinds
• Large and small missile hurricane impact and cycle tested (fixed over project out)

8225TL Thermal Windows
For high performance in a thermally broken window system

• Available as Projected, Casement, Top Hinged and Fixed
• Tested for Performance Class and Grade of HC90 and AW90
• 2-1/4" (57.2) frame depth and 0.090" nominal wall thickness
• Overlap Vent Design
• Patented ISOLOCK^® Thermal Break mechanically and adhesively bonds the thermal break material to the aluminum frame and prevents dry shrinkage.
• Cast white bronze cam locks and keepers
• Optional dual glazing with or without Venetian blinds
• Optional factory glazing

8225TLF Heavy Commercial
For applications requiring natural ventilation and thermal performance

• Available as Fixed, Projected and Casement
• Tested for Performance Class and Grade of HC70 and AW70
• 2-1/4" (57.2) frame depth and 0.125" nominal wall thickness
• Cast white bronze cam locks and keepers
• Flush Design
• Patented ISOLOCK^® Thermal Break design mechanically and adhesively bonds the thermal break material to the aluminum frame and prevents dry shrinkage
• Optional factory glazing
• Optional dual glazing with or without Venetian blinds

8225TLXO Heavy Commercial
For applications requiring a deeper frame section.

• Available as Fixed, Projected and Casement
• Tested for Performance Class and rate of HC70 and AW70
• 2-1/4" (57.2) vent depth and 4-1/2" (114.3) deep frame
• 0.125" nominal wall thickness
• Cast white bronze cam locks and keepers
• Offset appearance
• Patented ISOLOCK^® Thermal Break design mechanically and adhesively bonds the thermal break material to the aluminum frame and prevents dry shrinkage
• Optional factory glazing
• Optional dual glazing with or without Venetian blinds

8325TL Heavy Commercial
For high performance with optional triple glazing

• Available as Fixed, Projected and Casement
• Tested for Performance Class and Grade of HC80 and AW70
• 3-1/4" (82.6) frame depth and 0.090 nominal wall thickness
• Cast white bronze cam locks and keepers
• Patented ISOLOCK^® Thermal Break mechanically and adhesively bonds the thermal break material to the aluminum frame and prevents dry shrinkage
• Optional factory glazing
• Optional dual and triple glazing with or without Venetian blinds

5200 Commercial
For high performance yet cost effective windows with multiple vent selections

• Available as Fixed, Projected and Casement
• Tested for Performance Class and Grade C60
• 1-7/8" (47.6) frame depth and 0.062" (1.6) nominal wall thickness
• Overlap Vent Design
• Optional dual glazing with or without Venetian Blinds
• Cast white bronze cam locks and keepers
• Optional factory glazing

6200T Commercial
For high performance yet cost effective windows with multiple vent selections

• Available as Fixed, Projected and Casement
• Tested for Performance Class and Grade C60
• 1-7/8" (47.6) frame depth and 0.062" (1.6) nominal wall thickness
• Overlap Vent Design
• Optional dual glazing with or without Venetian Blinds
• Cast white bronze cam locks and keepers
• 6200T Thermal features conditioned thermal pockets that mechanically bond the thermal break material to the aluminum frame and prevent dry shrinkage and loss of adhesion
• Optional factory glazing

526 ISOPORT^® Windows
High performance Ribbon Window

• 14.6 mm ISOPORT^® glass-reinforced nylon 6/6 thermal break provides:
  -  Improved condensation resistance and thermal transmittance performance capability
  -  Rigid profile with composite structural performance
  -  Exterior / interior finish options
• Meets or exceeds the highest performance levels of CSA standard CAN/CSA-A440 windows
• Sash features mitered and clip, adhesive, stake joinery to provide rigid and weather tight corners
• Operating sash uses tubular extrusions
• Factory fabricated and assembled
• Optional full rain screen capability
• Accommodates 25 mm sealed glazing units
• Glass installed and replaced from interior
• Exterior pre-shim butyl glazing tapes
• Interior EPDM rubber glazing gaskets
• Lock-in glass stop
• Optional insect screens

5500 ISOWEB^® Window
Highest thermal performing fixed for punched and strip openings

• Meets or exceeds performance standards of ANSI/AAMA and 101/CAN/CSA440
• 4" (101.6) frame depth
• Cast white bronze cam locks and keepers
• Flush appearance with extreme frontal placement of glass
• ISOWEB^® glass reinforced nylon thermal break provides low thermal transmittance, high condensation resistance and eliminates dry shrinkage

5525 ISOWEB^® Window
Highest thermal performing fixed  for punched and strip openings

• Meets or exceeds performance standards of ANSI/AAMA and 101/CAN/CSA440
• 5" (127) frame depth
• Cast white bronze cam locks and keepers
• Flush appearance with extreme frontal placement of glass
• ISOWEB^® glass reinforced nylon thermal break provides low thermal transmittance, high condensation resistance and eliminates dry shrinkage
• Vented rain screen design and two-color option

Hung / Sliding Windows
8400TL Heavy Commercial
For high performance and design flexibility

• Available in fixed, offset fixed, single hung, double hung and horizontal sliding.
• Tested for performance class and grade ranging between HC/AW70 to HC/AW100
• 4" (101.6)master frame depth
• Available with standard face or putty glaze replication
• Patented ISOLOCK^® thermal barrier
• Master frame barrier consisting of a two-part, chemically curing high density polyurethane, which is mechanically and adhesively bonded to the aluminum
• Sash barrier consisting of a two-part, chemically curing high density polyurethane in conditioned thermal pockets, which is mechanically and adhesively bonded to the aluminum. 
• Factory Glazed

Ribbon Windows
516 ISOPORT^® Window Framing
High performance Ribbon Window

• 14.6 mm ISOPORT^® glass-reinforced nylon 6/6 thermal break provides:
  - Improved condensation resistance and thermal transmittance performance capability
  - Rigid profile with composite structural performance
  - Exterior / Interior finish options
• Meets or exceeds the highest performance levels of CSA standard
• CAN/CSA-A440 windows
• Seamless coupling mullion features unbroken weather joint on exterior surface
• Provision for thermal movement
• Simple joinery with overlapping flanges for economical construction and good weathering capability
• Optional full rain screen capability
• Accommodates 1" (25 mm) sealed glazing units
• Glass installed and replaced from interior
• Exterior pre-shim butyl glazing tapes
• Interior EPDM rubber glazing gaskets
• Lock-in glass stop
• Open-in frameless vent option
• Companion open-out or open-in vent inserts available
• Accepts 512 Ventrow ISOLOCK^® Ventilator inserts

518 ISOPORT^® Window Framing
High performance Ribbon Window

• 14.6 mm ISOPORT^® glass-reinforced nylon 6/6 thermal break provides:
  - Improved condensation resistance and thermal transmittance performance capability
  - Rigid profile with composite structural performance
  - Exterior / Interior finish options
• Meets or exceeds the highest performance levels of CSA standard
• CAN/CSA-A440 windows 
• Provision for thermal movement
• Simple joinery with overlapping flanges for economical construction and good weathering capability
• Optional full rain screen capability 
• Distinctive "Top Hat" accent feature 
• Accommodates 25 mm sealed glazing units 
• Glass installed and replaced from interior 
• Interior EPDM rubber glazing gaskets 
• Lock-in glass stop 
• Open-in frameless vent option 
• Companion open-out or open-in vent inserts available 
• Accepts 512 Ventrow ISOLOCK^® Ventilator inserts

PG 123^® ISOWEB^® Framing
Responding to the need for quality control, simplified fabrication and faster installation, Kawneer has designed PG 123^®, a ribbon window and multi-lite punched opening system with preglaze capability, labor-savings and unit construction.
 
The system is structural silicone glazed with captured head and sill cans, and intermediate horizontals.

Key Features Include:
 
Economy
 

• PG 123^® may be supplied in stock lengths or factory fabricated
• In addition, the system can be pre-assembled and pre-glazed under controlled shop conditions that save time compared to field construction
• Screw spline joinery, with square cuts and no miters or notching, reduce fabrication time
• Pre-glaze units are installed from the interior of the building to minimize weather delays and reduce the need for scaffolds and lift equipment

Performance

• Incorporates the ISOWEB^® glass reinforced nylon thermal break that provides improved condensation resistance and reduces thermal transmittance
• Fully pressure equalized with a rain screen gasket to eliminate the exterior seal between glazed units
• PG 123^® is fully tested to appropriate AAMA, ASTM & CAN/CSA A-440 standards for air, water and structural performance 
   

Aesthetics

• The ribbon window system is structural silicone glazed vertically with optional applied covers to give a four-sided captured appearance
• Optional vertical covers provide a clean, monumental appearance without sight line build up for building owners who prefer more traditional aesthetics
• The ISOWEB^® Thermal Break offers dual finish options, allowing different interior and exterior color finishes
• Accommodates a one-inch infill with ¼ inch adaptors for spandrel applications

Concealed Vents
GLASSvent (for Storefront Frames)
Visually Frameless Windows
For use with Trifab^® 400, Trifab^® VG 450, 451 & 451T, and EnCORE^® Framing Systems

• Available as a Project-Out or Outswing Casement Window
• No Exterior Framing Sightline Buildup
• Suitable for Retrofit or New Construction
• Performance Tested for a Class and Grade of HC40 and HC70
• Thermally Improved Flush Vent Design
• Structural Silicone Glazed for 1/4" (6.4) and 1" (25.4) infill
• Thermally improved
• Cast White Bronze Locking Hardware
• Concealed Stainless Steel 4-bar Hinges
• Optional Hardware Available

GLASSvent (for Curtain Walls)
For use with 1600 Wall System^®1 , 1600 Wall System^®2 , 1600 Wall System^®3 , 1600 Wall System^®4 , 1600 Wall System^®5 , 2250 IG, and 2250 LR Curtain Wall Systems

• Available as a Project-Out or Outswing Casement Window
• No Exterior Framing Sightline Buildup
• Suitable for Retrofit or New Construction
• Performance Tested in Accordance with AAMA 501 at 50 psf
• Thermally Improved Flush Vent Design
• Structural Silicone Glazed for 1/4" (6.4) and 1" (25.4) infills
• Cast White Bronze Locking Hardware
• Concealed Stainless Steel 4-bar Hinges
• Optional Hardware Available

512 Ventrow ISOLOCK^® Ventilator
Thermally broken, insulated, modular, insert ventilator

• Rain screen element over ventilator prevents direct rain contact with the ventilator weathering
• Air movement results from natural air circulation
• Highly effective ventilator seal
• No operating hardware required
• Finger tip control of opening and closing
• Visually the same, either open or closed 
• Can be installed in any Kawneer fixed frame with a depth of 4" (101.6) or more
• Optional keyed lock
• Meets the highest performance levels of CSA Standard CAN / CSA-A440
• Factory Fabricated