Hollow Metal Doors and Frames

No other manufacturer offers as robust a selection of steel doors and frames as Steelcraft. Our sole focus is on the design, manufacture and constant improvement of steel doors and frames, and it shows.

Designed for institutional, commercial and industrial applications, our doors and frames have continuously set the industry standard for high performance, reliability and style.

Steel Frames

Steelcraft manufactures a wide variety of frames in jamb depths for virtually any wall condition or entryway requirement.

Flush (F-, FE- and FN-Series) frames are designed to be installed as part of the wall framing sequence for exterior and interior walls of wood stud, steel stud and masonry construction. Frames are manufactured from 18-, 16-, 14- and 12-gauge (F only) commercial-quality carbon steel or A60 galvannealed steel. Flush frame corners lock together by bending over four integral tabs, and may also be welded and ground smooth.

Multiple Use (MU-Series) frames have a jamb profile similar to drywall frames but are designed to be installed as part of the wall framing sequence. MU-Series frames are available in 18-, 16- or 14-gauge cold-rolled or A60 galvannealed steel.

Drywall (DW- and K-Series) frames are designed to be installed in rough openings after the wall is constructed. They can be installed in minutes and can be relocated without damage to the frame. Drywall frame corners lock together once the frame is assembled. The tab design prohibits the head from raising, and keeps the head and jamb members in the same plane.

• Door Thickness 1-3/4" (45mm) 1-3/8" (35mm)
• Standard Heights 6'8" (2032mm) 7'10" (2388mm) 7'0" (2134mm) 8'0" (2438mm) 7'2" (2184mm) 10'0" (3048mm)
• Standard Widths Increments of 2" (50mm) from 1'6" (457mm) to 8'0" (2438mm)
• Custom dimensions upon request

Flush Doors

Flush doors are defined as having no seams on the face, with seams permitted on the edges.

Doors are available in commercial-quality carbon steel or A-60 galvannealed steel.

The L-Series door has a honeycomb core, beveled hinge, and lock edge with a visible seam on both edges. Optional cores are polystyrene or polyurethane. L-Series doors are available in 14-, 16-, 18- and 20-gauge steel.

The B-Series door has a steel-stiffened core with visible seams on the hinge and lock edges. 20-gauge vertical steel stiffeners are welded to the face sheets 4" on center, and are located 6" on center horizontally. Void areas between the stiffeners are filled with fiberglass. B-Series doors are available in 14-, 16- and 18-gauge steel.

The T-Series doors are designed to meet the requirements for temperature rise fire-rated applications. These doors include the same construction features of the L-Series doors, yet include a mineral fiber core for 250° Temperature Rise rating. T-Series doors are available in 14-, 16-, 18- and 20-gauge steel.

CE-Series are decorative doors featuring deeply embossed panels on both sides, creating the appearance of hand-carved doors. The door includes all construction features of the L-Series door and is available with a variety of glass sizes. These doors are available in 16-, 18- and 20-gauge steel.

H-Series hurricane-rated doors offer the utmost in life safety solutions. Each door, frame and hardware configuration offered has been tested and certified as an assembly to meet stringent Florida Building Code and Miami Dade standards. With this approach of assembly approval, Ingersoll Rand offers the assurance of a turnkey solution that is certified as a whole, while also expediting project approval.

The Paladin opening system is designed and tested to address the requirements of FEMA 361 and 320 guidelines, and those established by the Red Cross to protect the general public from the extreme environmental effects of tornados. The severe storm opening system is designed for commercial and residential tornado storm shelters.

GRAIN-TECH doors are L- or CE-Series doors, produced using steel sheets that have been embossed to create a wood grain appearance. GRAIN-TECH doors are fabricated from stainable steel and available with an optional factory finish in six standard color stains, including a factory-applied clear coat with ultraviolet (UV) inhibitors. Grain-Tech gives you the look of wood with the durability and fire rating of a steel door.

• Door Thickness 1-3/4" (45mm)
• Standard Heights 6'8" (2032mm) 7'10" (2388mm) L- & B-Series 7'0" (2134mm) 8'0" (2438mm) 7'2" (2184mm) 10'0" (3048mm)
• Standard Heights 6'8" (2032mm) 7'0" (2134mm) CE-Series 8'0" (2438mm)
• Standard Widths Increments of 2" (50mm) from 1'6" L- & B-Series (457mm) to 4'0" (1219mm). Custom dimensions available on request
• Standard Widths Increments of 2" (50mm) from CE-Series 2'6" (762mm) to 3'8" (1118mm)
• Custom sizes per request

Stile and Rail Doors

Steelcraft heavy duty stile and rail doors provide trouble-free service and attractive styling for high traffic areas such as main entrances.

A16- and AN16-Series doors are made of 16-gauge, 1-3/4" (45mm) thick tubular stiles and rails.

The stiles extend the full height of the door. The rails are mechanically joined to the stiles, forming a neat seam on the face.

The A16- and AN16-Series doors are available as FG (full glass), FG2 (2 glass areas) or FG3 (3 glass areas) only.

• Door Thickness 1-3/4" (45mm)
• Standard Heights 6'8" (2032mm) 7'10" (2388mm) 7'0" (2134mm) 8'0" (2438mm) A- & AN-Series 7'2" (2184mm)
• Standard Widths Increments of 2" (50mm) from 2'0" (610mm) to 4'0" (1219mm) A- & AN-Series
• Custom sizes per request

Acoustical Doors

Now you can get special application doors from the same source as your standard steel doors with the same lead time – four weeks.

Steelcraft sound control doors and frames are an ideal solution for applications ranging from sound studios to school band rooms, hospitals, office complexes and museums. Made available through a relationship between Ingersoll Rand and Overly Door Company, these special-use doors deliver quality you can count on.

• STC-43 rating on single-swing configurations
• 16-gauge steel door and 14-gauge steel frames
• Galvannealed steel construction available
• Available UL rated up to 90 minutes (UL 10C)
• Electric hinge prep and astragals available
• Designed for use in drywall, masonry and EMA applications
• Four lite sizes available – V, N3, N4, N5
• Includes hinge preps for 4 1/2" or 5" heavy weight hinges
• Bundled solution – gaskets and door bottoms included in every order
• Prime painted at the factory
• Wood-crated for shipping
• Four-week lead time for delivery

Ingersoll Rand Security Technologies
11819 N. Pennsylvania Street
Carmel, IN 46032
Tel: 877-671-7011
Fax: 800-452-0665
E-Mail: securityinfo@irco.com
Website: www.securitytechnologies.ingersollrand.com