InKan Limited
14 Indell Lane
Brampton, Ontario L6T 3Y3
Canada
Tel: (905) 793-4747
Toll-Free: (800) 387-2481 U.S. (Midwest & East)
800) 387-2236 Canada (from Ontario)
Fax: (905) 793-9367
Web site: http://www.inkan.on.ca

Photo features a custom entrance system which includes a stainless steel and brass combination on the cladded columns, rails, header and pulls.

SWING, BIFOLD & ACCORDION GLASS DOORS & HARDWARE

SPECIFICATIONS
SWING DOORS

DESIGN
As shown on drawings and series type.

MANUFACTURE
Centre hung or offset pivot doors and manufactured by InKan Limited, Brampton, Ontario, Canada.

GLASS
12mm (1/2"), 10mm (3/8") Ultra-lite tempered clear glass, as manufactured by InKan Limited (CAN 2- 12. 1-79 National Standard). Tinted glass optional in 12mm and 10mm thickness.

HARDWARE
Standard or custom hardware as manufactured by InKan Limited.

METAL
Aluminum, Stainless Steel, Brass, Bronze.

FINISHES
Mirror stainless steel
Brushed stainless steel
Mirror brass
Brushed brass
Mirror bronze
Brushed bronze
Clear and anodized aluminum
Aluminum finishes in hardcoat – medium bronze, black, champagne.

CLOSERS
Floor closer

• Dorma BTS 80
• Universal hold-open

Overhead concealed closer

• Dorma RTS 88

SWING DOORS
100 Series – Top and bottom rails
200 Series – Patch fittings
250 Series – Combination top patch fitting and bottom rail
300 Series – Metal door rails top and bottom, side stiles, jam and header
350 Series – Metal door rails top and bottom, side stiles

SLIDING DOORS
510 Series – Bottom roller slider, light duty
520 Series – Top hung slider, medium duty
530 Series – Top hung parallel stacking, heavy duty
540 Series – Top hung 90° stacking, heavy duty

BIFOLD & ACCORDION DOORS
610 Series – Bifold door
620 Series – Accordion door even panel (no egress door)
630 Series – Accordion door uneven panel (end panel egress door)

Photo displays 530 Slider separating ATM machines from the bank branch for after hours access to the ATM's.

SLIDING GLASS DOORS & HARDWARE

InKan's 530 parallel & 540 90° top hung sliding stack wall systems incorporate the highest quality components to ensure smooth, easy, quiet & long lasting operation. Low tolerance curving of the extrusions provides the smoothest operation for our curved systems. Bottom guide track may be eliminated on straight stackers if desired.

Precision control, from drawing board to manufactured product, guarantees a custom built system which is both practical and durable.