The Hollaender Manufacturing Company
10285 Wayne Avenue
Cincinnati, OH 45215
Tel: 800.772.8800
Fax: 800.772. 8806
Website: www.hollaender.com
E-mail: sales@hollaender.com
All Hollaender products are made with pride in the USA.
All Hollaender products are available throughout the USA. Products are also available for international export – contact Hollaender for information.
Hollaender® manufactures a wide array of component (sometimes called mechanical) aluminum railing systems in both handrail and guardrail designs. Hollaender® component railing systems combine anodized or powder coated aluminum frames in either our Speed-Rail® or Interna-Rail® designs with a variety of infill panels to offer a solution that is extremely non-corrosive and at the same time aesthetically attractive. Glass as well as steel infill panels are standard offerings.
For industrial, non-public access applications, these same systems can be provided in 2-line or 3-line configurations as well.
- Railing system meets ADA, IBC and OSHA codes
- Non-corrosive
- Component-based (non-welded)
- Cost-effective alternative to welded steel
- Ease of installation
- Ease of reconfiguration
- Low maintenance vs. welded steel
The frame can be designed with Speed-Rail® slip-on fittings for a more industrial look, or Interna-Rail® internal fittings for a more architectural look. Metal infill panels are available in several options. Finishes available are architectural mill finish, clear anodized, or a myriad of powder-coat colors. 3/8 " glass infill is also available in tempered or laminated.
- Mounting Flanges – top mount, side mount, & core mount.
- Infill Panels – horizontal rails, perforated metal, pickets, wire woven mesh and glass infill.
- Panel Retention System – one and two piece panel clips are designed specifically to secure these infill panels in either our Speed-Rail® or Interna-Rail® railing systems.
- Retrofit Handrail System – uses 146 retrofit panel connectors with infill panel to upgrade existing 2 or 3 line rail to code.
"Industrial Chic" slip-on style fittings, popular in lofts, industrial applications, store fixture applications, etc...
For applications which require a sleek architectural design and finish.
Handrail system designed to meet the requirements of the Americans with Disabilities Act.
The solution for all your demanding safety rail requirements.
- A wide variety of infill panel options – glass infill (NEW), as well as various patterns in perforated metal, square or diagonal wire mesh, and component picket.
- Anodized aluminum pipe and fitting components combined with steel infill panels that have been electrocoated (4-step process that adds a layer of anti-corrosion material) as well as powder coated provide a handrail system that will provide years of service with little or no maintenance.
- Component aluminum systems use no welding and inherently cleaner looking than welded aluminum systems, especially when anodized. Strength of aluminum is reduced by 60% at the weld.
- Glass or composite infill panels increase the flexibility of these railing systems.
- Ease of Installation – Hollaender Interna-Rail® systems come in prefabricated sections of up to 20 ft., and install rapidly in place. Speed-Rail® systems can be shipped prefabricated, or as a "kit of parts".
- Speed-Rail® is the system of choice in this market. Systems are shipped with 24 ft. sections of pipe that are cut to length on site.
- No need for shop drawings.
- Railing is super-easy to reconfigure on site if drawings are not correct and something does not fit.
- Speed-Rail® 535.0 aluminum magnesium alloy components can be used with any other metal (steel, stainless steel, etc...) with no fear of dissimilar metal reactions.
- Most corrosive resistant aluminum casting alloy available.
- High strength as cast.
- Bright, attractive architectural tumbled finish.
- Conforms to ASTM B26 & B179.
- Knurl cup point design provides tremendous resistance to loosening due to heavy vibration.
- Full contact of point greatly resists pull out and rotational slip.
- Conforms to FF-S-200, ANSI/ASME B18.3 Type C/G.
All are registered trademarks of the Hollaender Manufacturing Company:
- The Rib® Design
- Hollaender®
- Speed-Rail®
- Nu-Rail®
- Speed-Rail® II
- Rackmaster®
- Mend-A-Rail®
- Interna-Rail®
- Bumble Bee®
|