Consists of the analog addressable FireNET™ and FireNET™ Plus Control Panels.
Each panel is equipped with 2 SLC loops, and may be expanded to 4 loops. Each loop supports 127 devices in any combination (sensors or modules). In addition, analog sounder bases may be used with each sensor on the loop, for a maximum capacity of 254 points per loop.
FireNET™ Plus is an analog addressable control panel suitable for small to mid-sized installations. Each panel has 1 SLC loop, and may be expanded to 2 loops.
| STANDARD FEATURES |
FireNET |
FireNET Plus |
| UL 864 9th edition approved |
x |
x |
|
Analog design using Hochiki\'s advanced DCP protocol for fast and robust
communication |
x |
x |
|
Up to 127 sensors & modules, plus 127 analog sounder bases, for a total of
254 points possible per loop
|
x |
x |
| Uses standard wire, no shielded or twisted pair required on SLC loops |
x |
x |
| Supports Class B (style 4) and Class A (style 6 or 7) SLC loops |
x |
|
| 4 on board Class B (style Y) NAC circuits rated at 2.5 Amp each |
x |
x |
| Programmable sensitivity levels per device & automatic day/night
sensitivity modes |
x |
x |
| Automatic daily calibration & drift compensation routine |
x |
x |
| Large 8-line x 40-character LCD display (320 char.) |
x |
x |
| 2 or 4 loop versions (800 addresses/sub-addr. max.) |
x |
|
| 1 or 2 loop option |
|
x |
| Dual RS-485 bus for panel network |
option |
option |
2 built-in RS-232 interfaces for programming via a PC and
serial printer interface |
x |
x |
| 5 on board programmable Form C relays rated at 1 amp at 30VDC
(Fire1, Fire2, trouble, supervisory, aux.) |
x |
|
| 3 on board programmable form C relays |
|
x |
| 500mA of auxiliary power available rated at 24 VDC |
x |
x |
| Loop Explorer Windows configuration utility |
x |
x |
| *500 network wide software zones |
x |
x |
| Network Capability of up to 64 panels |
option |
option |
| RS485 slave bus for expansion – up to 32 FN-4127-IO boards or up to
15 FN-LCD-S serial annunciators and up to 16 FN-4127-IO boards |
x |
x |
| integrated digital alarm communicator (DACT) option |
|
option |
| Auto-learn feature |
x |
x |
| Built in help and alarm information screens |
x |
x |
| Fire Drill test function |
x |
x |
| Walk Test function |
x |
x |
| Alarm Verification feature |
x |
x |
Powerful & versatile Cause & Effect programming (up to 500 maximum,
network wide) including: *Cause & Effect action,
*Disable function configuration, *Test mode configuration |
x |
x |
The FireNET™ series is available with a plexiglass window, sometimes called the Denver Door. This window meets requirements for major cities including Denver, CO
VoiceNET™ distributed audio control for voice evacuation in high-rise buildings and similar applications
Provides true multiplex 6 channel distributed audio control. Includes integrated fire phone, area of rescue and fan and damper control capability. Live microphone page to any zone. Modular for convenience and cost effectiveness. Built-in alarm and alert signals, and message repeater. Up to 4-minute message capacity.
The FireNET Control Panels work with devices including (but not limited to):
- Serial and Network Annunciators
- Digital Alarm Communicator
- Analog duct detector
- Analog Addressable Modules for contact monitoring, output and relay function, short circuit isolation
- Analog Sensors – Please see the Detectors Products section for further details
- Bases
- Addressable Manual Pull Stations
- City Tie Module
- Power supplies
- Test Accessories
- FireNET™ Graphix Software Package
- Hand-held programmer for sensors and modules
For Additional Information:
Hochiki America Corporation
7051 Village Drive, Suite 100
Buena Park, CA 90621-2268
(714) 522-2246
sales@hochiki.com
www.hochiki.com
|