Series 40 - H.D.P. High Density Polymer

OP/OVERALL PRODUCT
General's H.D.P. toilet partitions, showers and dressing compartments are manufactured using high density polymer resin. Color is solid thru-out. Compartments cannot rust, rot, de-laminate or absorb odors like marble. Surface has a beautiful orange peel finish to help prevent scratches. Completely water resistant, can be used under any moisture condition. Perfect for shower and dressing compartments as well as toilet partitions.

ANTI-GRIP HEADRAIL
Overhead braced Series 40 provides rigid compartments for the most active occupants. General Partitions' use of an extruded aluminum channel with integral loafer rail assures you of the strongest toilet compartment available.

SPECIFICATIONS

Scope - All H.D.P. (High Density Polymer) toilet partitions shall be 40 series, floor supported with headrail as manufactured by General Partitions Mfg. Corp., Erie, Pennsylvania.

Doors and Panels - Shall be 1" thick solid high density polyethylene formed under pressure. Solid color throughout. All edges to be machined radius and all sharp edges removed.

40 Series - Pilasters - Shall be same construction as doors and panels. Pilasters are to be anchored to the floor with heavy gauge angle. Top of pilasters to be securely braced with extruded aluminum headrail with integral crown loafer rail.

Headrail - To be 1 7/8" x 1 1/32" x 1/16" with integral crown loafer rail, extruded aluminum heat-treated and anodized with necessary fittings.

Hardware - Surface Mounted Aluminum Slide Latch (No. 2000AL), Coat Hook (No. 6200D), Aluminum Wrap Around Hinge Assembly (No. 1500AL) and Aluminum Door Stop & Keeper (No. 2060AL).

Fittings - Panels anchored to pilasters with a continuous "U" bracket. Panels and pilasters are anchored to the wall with continuous aluminum "T" brackets. Pilaster trim to be 3" high. All hardware and fittings to be secured with stainless steel one-way vandal-proof sex bolts or No. 14 stainless steel tamper resistant torx screws of proper length.

SHOWER CABINET SPECIFICATIONS

All shower cabinets shall be high density polymer walls with pre-cast terrazzo receptor as manufactured by General Partitions Mfg. Corp., Erie, Pennsylvania.

Walls - Shall be 1" thick high density polymer.

Receptors - Black and white terrazzo sizes 32" x 32", 36", 40" x 40" Neo-corner or 40" x 48" and 40" x 40" handicapped.

Fittings - Brass drain with stainless steel strainer.

Options - Shower walls may be prepared at factory to receive shower head and valve supplied by others. Curtains, valves, heads, arms and soap dishes are available as optional extras.

STANDARD COLORS

The colors shown are lithographed & scanned swatches (not exact color match). Because responsible manufacturers of high density polymer reserve the right of reasonable color variation, we must reserve the same right. Contact us for samples. Other colors available; Burgundy, Galaxy (sample shown) and Onyx (sample shown).

URINAL SCREENS
Wall Hung (WHS)
Wall Hung Flange (WHF)
Floor Braced Screen (FBS)
Floor Supported With Headrail (FSH)

SHOWER COMPARTMENTS
Shower Cabinets & Partitions
Double-Wall Shower
Physically Handicapped Showers
Showers/Dressing Compartments

A - 1500 AL-T Top Assembly Aluminum Wrap-Around Gravity Hinge
B - 1500 AL-B Bottom Assembly Aluminum Wrap-Around Gravity Hinge
C - 2050-AL-IS Inswing Stop and Keeper - Aluminum 2050-AL-OS Outswing (Not Shown) Stop and Keeper - Aluminum
D - 6250 Door Bumper
E - 6300 AL Door Pull
F - 6000 EXT 1" Double Height (3") Aluminum "T" Bracket
G - 2000 AL Surface Mounted Slide Latch - Aluminum
H - 6200D Combination Coat Hook and Bumper