Product Classification: 10 21 13
Sweet’s Catalog Code: 10 21 13/GEN, BuyLine 0080
This screen contains descriptive information for the 40 Series toilet partitions,
as manufactured by General Partitions Mfg. Corp. Open the General Partitions
Showcase presentation at this time to review further information on product
data, services and specifications.
The most popular style of General Partitions toilet compartment construction
is the 40 Series - Floor Supported With Headrail. It is recommended for new
and old buildings where economy, ease of installation and rigid overhead bracing
are required. General Partitions’ use of an extruded aluminum channel with integral
loafer rail assures you of the strongest toilet compartment available.
Only the finest quality materials are used in the manufacture of "General" toilet
partitions. The 40 Series is available in the following materials:
The economy and durability of baked enamel makes it the popular choice for new
construction or remodeling. Periodic washing with a mild soap and an occasional
waxing with a good automobile wax will keep the finish looking new for years.
General’s Finish is a superior quality polyester enamel applied automatically
by a hot air assisted electrostatic system, baked at 400 oF. The exclusive use
of galvanized bonderized steel gives additional protection and enhances adhesion.
General’s exclusive use of type 304 stainless steel polished to a No. 4 Finish
offers the ultimate in partitions. The Finish is protected in the manufacturing
process and in shipping by a P.V.C. film which is removed at the job site. Any
scratches can be removed and the original beauty restored by buffing. Also available
with a Deep Textured surface or a Baked Enamel finish.
General’s High Pressure Plastic Laminate Partitions are available in wood grains
or solid color. High Pressure Laminates meet or exceed NEMA Standards. Standard
Core is particle board and is not recommended for high moisture areas. For high
moisture areas a plywood core or solid phenolic core should be used.
Solid Phenolic Core Panels are composed of melamine-impregnated decorative surface
papers superimposed over a varying number of kraft phenolic core sheets to achieve
a desired thickness. To form a one piece unit which will not delaminate; edges
are dark brown or black solid phenolic resin. Completely water resistant, impervious
to steam, soaps and detergents and will not mildew.
Please open General Partitions’ showcase presentation for detailed specifications
for each type of material.
In the case of extreme moist climate conditions where rust resistance is a must,
or in schools and public buildings where rigidity is necessary, heavy-wall extruded
aluminum pilasters can provide maximum strength and moisture resisting features.
Available in 1 1/4" x 1 1/4" and lengths of 58" or 70" and in 2", 3" widths
and lengths up to 120". The 3" pilaster is designed specifically for alcove
conditions. It eliminates the need for unsightly brackets as well as eliminating
any sight gap. General Partitions’ 3" extruded aluminum two-piece alcove pilaster
allows the panel to be inserted into the pilaster forming a strong, adjustable
connection.
|